IMT 555 vs John Deere-LANZ 700

9 material differences · fewer than 12

Tractor one

1964–1971

No measured PTO figure

Tractor two

1963–1965

No measured PTO figure

Which should you choose?

Read our verdict on the 555 and the 700 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

IMT 555 and John Deere-LANZ 700, field by field
Field	555	700	Gap
Engine
Engine power, claimed claimed	49.3 hp	49.3 hp	—
Engine declared	IMR-PERKINS O-34/TA	John Deere 405	differs
Displacement declared	3.34 L	2.71 L	+23% 555
Maximum torque declared	141 lb·ft · 191 N·m	125 lb·ft · 170 N·m	+12% 555
Transmission
Top speed declared	15.5 mph · 25 km/h	12.4–18.6 mph · 20–30 km/h	differs
Clutch declared	Pedal operated dry two-stage double clutch	—	—
Hydraulics & hitch
Pump flow declared	4.0 gpm · 15.1 L/min	—	—
Three-point lift at ends declared	2,601 lb · 1,180 kg	—	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,123 lb · 1,870 kg	5,071 lb · 2,300 kg	+23% 700
Maximum permissible mass declared	—	7,716 lb · 3,500 kg	—
Wheelbase declared	84.8 in · 2,155 mm	76.8 in · 1,950 mm	+11% 555
Length declared	137.2 in · 3,485 mm	133.5 in · 3,390 mm	—
Width declared	66.9 in · 1,700 mm	65.0 in · 1,650 mm	—
Height declared	66.5 in · 1,690 mm	62.4 in · 1,585 mm	+7% 555
Ground clearance declared	23.9 in · 607 mm	15.2 in · 385 mm	+58% 555
Turning radius, braked declared	12.3 ft · 3.75 m	—	—
Fuel tank declared	47.6 qt · 45.0 L	—	—

Source

Source