- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1960–1969
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
J.I. Case 841 Full specifications
The manufacturer claimed 66.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
66.0 hp
49.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 841”, claimed
- Weight
- 6,905 lb
- Hyd. flow
- 15.5 gpm
- Top speed
- 18.6 mph
J.I. Case 841 specs: key facts
The J.I. Case 841 was built from 1960 to 1969.
The J.I. Case 841 has a claimed engine power (gross or net not stated) of 49.2 kW (66.0 hp); it has no measured PTO figure.
The J.I. Case 841 is two-wheel drive (2WD).
The J.I. Case 841 weighs 3,132 kg (6,905 lb) unladen.
The J.I. Case 841 has an independent rear PTO running at 540/1000 rpm.
The hydraulic pump of the J.I. Case 841 delivers 58.7 L/min (15.5 gpm).
Source · Traktorenlexikon, “Case 841”
How much horsepower does an 841 have?
The only figure for the 841 is 66.0 hp (49.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case 841”
How much will an 841 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 841 are below.
| Pump flow | 15.5 gpm · 58.7 L/min |
|---|---|
| Hitch category | Category 1 |
| Rear PTO | Independent, engine-driven, 540/1000 rpm |
Source · Traktorenlexikon, “Case 841”
What transmission does an 841 have?
Transmission specifications for the 841 are below.
| Steering | Mechanical steering with ball head suspension incl. hydraulic steering assistance |
|---|---|
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Case 841”
How much does an 841 weigh?
An 841 weighs 6,905 lb (3,132 kg) unladen.
| Unladen weight | 6,905 lb · 3,132 kgLPG: 3,192 |
|---|---|
| Wheelbase | 101.7 in · 2,584 mm |
| Length | 143.4 in · 3,642 mmGP: 3,880 |
| Width | 85.2 in · 2,165 mm |
| Height | 66.0 in · 1,676 mm |
| Ground clearance | 20.0 in · 508 mm |
| Rear track | 52.0–88.0 in · 1,321–2,235 mm |
| Turning radius, braked | 11.9 ft · 3.63 m |
Source · Traktorenlexikon, “Case 841”
Which tractors compare with an 841?
Within 10% of its 65.1 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Steyr 280a65 hp PTO, claimed · 1958–1972Side by side with the 841 →
- OLIVER 1650 (4WD)65.1 hp PTO, claimed · 1964–1969Side by side with the 841 →
- Landini R 8000 Super-Special (TL-9 N/B)64.5 hp PTO, claimed · 1967–1974Side by side with the 841 →
- Deutz D 720666 hp PTO, claimed · 1974–1981Side by side with the 841 →
- Steyr Plus 7066.1 hp PTO, claimed · 1968–1975Side by side with the 841 →
- Steyr 870 (a)66.1 hp PTO, claimed · 1971–1975Side by side with the 841 →
Everything else people ask
Is an 841 two-wheel drive or four-wheel drive?
The J.I. Case 841 is two-wheel drive (2WD).
What PTO does an 841 have?
An 841 has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Case 841”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 841 — CC BY-SA 4.0, WIKIBOOKS-TL-115320 · revision 989855. Wikibooks contributors (Traktorenlexikon). Original document