J.I. Case 841 vs OLIVER 1650 (4WD)

8 material differences · fewer than 12

Tractor one

1960–1969

No measured PTO figure

Tractor two

1964–1969

No measured PTO figure

Which should you choose?

Read our verdict on the 841 and the 1650 (4WD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 4 fields identical or within 5%, which is not counted as material

J.I. Case 841 and OLIVER 1650 (4WD), field by field
Field	841	1650 (4WD)	Gap
Engine
Engine power, claimed claimed	66.0 hp	66.1 hp	—
Transmission
Top speed declared	18.6 mph · 30 km/h	13.7 mph · 22 km/h	+36% 841
Clutch declared	—	Foot-operated dry single-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	15.5 gpm · 58.7 L/min	12.0 gpm · 45.5 L/min	+29% 841
Rear PTO speeds declared	540/1000 rpm	550 rpm	differs
Weight & dimensions
Unladen weight declared	6,905 lb · 3,132 kg	7,815 lb · 3,545 kg	+13% 1650 (4WD)
Wheelbase declared	101.7 in · 2,584 mm	84.3 in · 2,141 mm	+21% 841
Length declared	143.4 in · 3,642 mm	147.1 in · 3,736 mm	—
Width declared	85.2 in · 2,165 mm	76.3 in · 1,938 mm	+12% 841
Height declared	66.0 in · 1,676 mm	80.0 in · 2,032 mm	+21% 1650 (4WD)
Ground clearance declared	20.0 in · 508 mm	19.5 in · 495 mm	—
Turning radius, braked declared	11.9 ft · 3.63 m	12.2 ft · 3.71 m	—
Fuel tank declared	69.2 qt · 65.5 L	91.9 qt · 87.0 L	+33% 1650 (4WD)

Source

Source