6 material differences · fewer than 12

Tractor oneJ.I. Case 8411960–1969No measured PTO figureTractor twoSteyr 280a1958–1972No measured PTO figure

Which should you choose?

Read our verdict on the 841 and the 280a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 4 fields identical or within 5%, which is not counted as material

J.I. Case 841 and Steyr 280a, field by field
Field841280aGap
Engine
Engine power, claimed claimed66.0 hp67 hp—
Engine declared—Steyr WD-413—
Displacement declared—5.32 L—
Transmission
Top speed declared18.6 mph · 30 km/h15.5 mph · 25 km/h+20% 841
Clutch declared—Pedal-operated dry single-plate clutch—
Hydraulics & hitch
Pump flow declared15.5 gpm · 58.7 L/min——
Pressure declared—2,134 psi · 147 bar—
Rear PTO speeds declared540/1000 rpm575 rpmdiffers
Weight & dimensions
Unladen weight declared6,905 lb · 3,132 kg6,900 lb · 3,130 kg—
Wheelbase declared101.7 in · 2,584 mm86.8 in · 2,205 mm+17% 841
Length declared143.4 in · 3,642 mm139.8 in · 3,550 mm—
Width declared85.2 in · 2,165 mm76.2 in · 1,936 mm+12% 841
Ground clearance declared20.0 in · 508 mm17.4 in · 442 mm+15% 841
Turning radius, braked declared11.9 ft · 3.63 m12.5 ft · 3.80 m—
Fuel tank declared69.2 qt · 65.5 L105.7 qt · 100 L+53% 280a

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

J.I. Case 841 sources

Source
  • Source: Traktorenlexikon, “Case 841”

Steyr 280a sources

Source
  • Source: Traktorenlexikon, “Steyr 280a”