• Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1958–1972
  • 2,146 built

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Steyr 280a Full specifications

Steyr WD-413 four-cylinder diesel. The manufacturer claimed 67 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

67 hp

50 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Steyr 280a”, claimed

Weight
6,900 lb
3-point lift
4,409 lb
Top speed
15.5 mph

Steyr 280a specs: key facts

  • The Steyr 280a was built from 1958 to 1972.

  • The Steyr 280a has a claimed engine power (gross or net not stated) of 50 kW (67 hp); it has no measured PTO figure.

  • The Steyr 280a is two-wheel drive (2WD).

  • The Steyr 280a has a Steyr WD-413 engine, a 4-cylinder 5.32 L diesel unit.

  • The Steyr 280a weighs 3,130 kg (6,900 lb) unladen.

  • The Steyr 280a has a rear PTO running at 575 rpm.

  • The three-point hitch of the Steyr 280a lifts 2,000 kg (4,409 lb) at the lower-link ends.

Source · Traktorenlexikon, “Steyr 280a”

How much horsepower does a 280a have?

The only figure for the 280a is 67 hp (50 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
67 hp

Source · Traktorenlexikon, “Steyr 280a”

What engine is in a 280a?

A 280a has a Steyr WD-413, a 4-cylinder 5.32 L diesel engine.

Engine — 280a engine specifications
Make & modelSteyr WD-413
Cylinders4, liquid-cooled
Displacement324.8 ci · 5.32 L
Electrical system12 V

Source · Traktorenlexikon, “Steyr 280a”

How much will a 280a lift?

A 280a lifts 4,409 lb (2,000 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 280a hydraulics and PTO specifications
Pressure2,134 psi · 147 bar
Hitch categoryCategory 2
Lift at ends4,409 lb · 2,000 kg
Rear PTO575 rpm
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Steyr 280a”

What transmission does a 280a have?

Transmission specifications for the 280a are below.

Transmission — 280a transmission specifications
ClutchPedal-operated dry single-plate clutch
BrakesPedal-operated internal expanding brake on rear wheels, designed as individual wheel brake
SteeringMechanical worm and roller globoid steering
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Steyr 280a”

How much does a 280a weigh?

A 280a weighs 6,900 lb (3,130 kg) unladen.

Weights & dimensions — 280a weights and dimensions
Unladen weight6,900 lb · 3,130 kg
Wheelbase86.8 in · 2,205 mm
Length139.8 in · 3,550 mm
Width76.2 in · 1,936 mm
Height85.4 in · 2,170 mm
Ground clearance17.4 in · 442 mm
Front track59.1 in · 1,500 mmWikibooks gives one track for both axles
Rear track59.1 in · 1,500 mmWikibooks gives one track for both axles
Turning radius, braked12.5 ft · 3.80 m

Source · Traktorenlexikon, “Steyr 280a”

Which tractors compare with a 280a?

Within 10% of its 65 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 280a two-wheel drive or four-wheel drive?

The Steyr 280a is two-wheel drive (2WD).

What PTO does a 280a have?

A 280a has a 575 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Steyr 280a”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Steyr 280aCC BY-SA 4.0, WIKIBOOKS-TL-84273 · revision 1003878. Wikibooks contributors (Traktorenlexikon). Original document