• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1961–1967
  • 7,348 built

WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

International Harvester 606 Full specifications

INTERNATIONAL HARVESTER C-221 six-cylinder. The manufacturer claimed 53.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

53.2 hp

39.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IHC 606”, claimed

Weight
5,214 lb
Top speed
18.6 mph

International Harvester 606 specs: key facts

  • The International Harvester 606 was built from 1961 to 1967.

  • The International Harvester 606 has a claimed engine power (gross or net not stated) of 39.7 kW (53.2 hp); it has no measured PTO figure.

  • The International Harvester 606 is two-wheel drive (2WD).

  • The International Harvester 606 has a INTERNATIONAL HARVESTER C-221 engine, a 6-cylinder unit.Source 2

  • The International Harvester 606 weighs 2,365 kg (5,214 lb) unladen.

  • The International Harvester 606 has a dependent rear PTO running at 543 rpm.

Source · Traktorenlexikon, “IHC 606”

How much horsepower does a 606 have?

The only figure for the 606 is 53.2 hp (39.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
53.2 hp

Source · Traktorenlexikon, “IHC 606”

What engine is in a 606?

A 606 has an INTERNATIONAL HARVESTER C-221, a 6-cylinder engine.

Engine — 606 engine specifications
Make & modelINTERNATIONAL HARVESTER C-221Source 2
Cylinders6, liquid-cooledSource 2
Electrical system12 V

Source · Traktorenlexikon, “IHC 606”

How much will a 606 lift?

Hydraulic and PTO specifications for the 606 are below.

Hydraulics & PTO — 606 hydraulics and PTO specifications
Rear PTODependent, transmission-driven, 543 rpm

Source · Traktorenlexikon, “IHC 606”

What transmission does a 606 have?

Transmission specifications for the 606 are below.

Transmission — 606 transmission specifications
ClutchPedal-operated dry single-plate clutch
BrakesPedal-operated disc brakes acting on differential side shafts as individual wheel brakes
SteeringHydraulic steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “IHC 606”

How much does a 606 weigh?

A 606 weighs 5,214 lb (2,365 kg) unladen.

Weights & dimensions — 606 weights and dimensions
Unladen weight5,214 lb · 2,365 kg
Wheelbase78.0 in · 1,981 mm
Height61.8 in · 1,570 mm
Front track52.0–76.0 in · 1,321–1,930 mm
Rear track48.0–76.0 in · 1,219–1,930 mm
Turning radius, braked9.7 ft · 2.95 m

Source · Traktorenlexikon, “IHC 606”

Which tractors compare with a 606?

Within 10% of its 53.6 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 606 two-wheel drive or four-wheel drive?

The International Harvester 606 is two-wheel drive (2WD).

What PTO does a 606 have?

A 606 has a dependent 543 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “IHC Farmall 460”; and Traktorenlexikon, “IHC 606”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IHC 606CC BY-SA 4.0, WIKIBOOKS-TL-118724 · revision 1055430. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: IHC Farmall 460CC BY-SA 4.0, WIKIBOOKS-TL-118699 · revision 1055545. Wikibooks contributors (Traktorenlexikon). Original document