International Harvester 606 vs Steyr 760 (a)

6 material differences · fewer than 12

Tractor one

1961–1967

No measured PTO figure

Tractor two

1971–1976

No measured PTO figure

Which should you choose?

Read our verdict on the 606 and the 760 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 2 fields identical or within 5%, which is not counted as material

International Harvester 606 and Steyr 760 (a), field by field
Field	606	760 (a)	Gap
Engine
Engine power, claimed claimed	53.2 hp	59.3 hp	+11% 760 (a)
Engine declared	INTERNATIONAL HARVESTER C-221	Steyr WD-408.40	differs
Displacement declared	—	3.14 L	—
Maximum torque declared	—	159 lb·ft · 216 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	—	8.9 gpm · 33.6 L/min	—
Pressure declared	—	2,489 psi · 172 bar	—
Three-point lift at ends declared	—	5,291 lb · 2,400 kg	—
Rear PTO speeds declared	543 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,214 lb · 2,365 kg	5,919 lb · 2,685 kg	+14% 760 (a)
Maximum permissible mass declared	—	9,921 lb · 4,500 kg	—
Wheelbase declared	78.0 in · 1,981 mm	83.9 in · 2,130 mm	+8% 760 (a)
Length declared	—	139.4 in · 3,540 mm	—
Width declared	—	72.2 in · 1,834 mm	—
Height declared	61.8 in · 1,570 mm	91.1 in · 2,314 mm	+47% 760 (a)
Ground clearance declared	—	18.5 in · 469 mm	—
Turning radius, braked declared	9.7 ft · 2.95 m	11.5 ft · 3.50 m	+19% 760 (a)
Fuel tank declared	90.9 qt · 86.0 L	87.7 qt · 83.0 L	—

Source

Source