- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1971–1974
- 5,558 built
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester 824 (A) Full specifications
INTERNATIONAL-HARVESTER D-239 or D-246 four-cylinder diesel. The manufacturer claimed 73.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
73.0 hp
54.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “McCormick 824 (A)”, claimed
- Weight
- 6,934 lb
- Hyd. flow
- 7.7 gpm
- Top speed
- 18.6 mph
International Harvester 824 (A) specs: key facts
The International Harvester 824 (A) was built from 1971 to 1974.
The International Harvester 824 (A) has a claimed engine power (gross or net not stated) of 54.4 kW (73.0 hp); it has no measured PTO figure.
The International Harvester 824 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The International Harvester 824 (A) has a INTERNATIONAL-HARVESTER D-239 or D-246 engine, a 4-cylinder diesel unit.
The International Harvester 824 (A) weighs 3,145 kg (6,934 lb) unladen.
The International Harvester 824 (A) has an independent rear PTO running at 540/1000 rpm.
The hydraulic pump of the International Harvester 824 (A) delivers 29.2 L/min (7.7 gpm).
Source · Traktorenlexikon, “McCormick 824 (A)”
How much horsepower does an 824 (A) have?
The only figure for the 824 (A) is 73.0 hp (54.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “McCormick 824 (A)”
What engine is in an 824 (A)?
An 824 (A) has an INTERNATIONAL-HARVESTER D-239 or D-246, a 4-cylinder diesel engine.
| Make & model | INTERNATIONAL-HARVESTER D-239 or D-246 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Max torque | 185 lb·ft · 251 N·m @ 1,530 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “McCormick 824 (A)”
How much will an 824 (A) lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 824 (A) are below.
| Pump flow | 7.7 gpm · 29.2 L/min |
|---|---|
| Pressure | 2,988 psi · 206 bar |
| Hitch category | Category 2 |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,980 engine rpmEngages under loadGround-speed PTO available |
Source · Traktorenlexikon, “McCormick 824 (A)”
What transmission does an 824 (A) have?
Transmission specifications for the 824 (A) are below.
| Clutch | Pedal-operated dry LuK single-disc clutch |
|---|---|
| Steering | Hydrostatic ZF-ROSS steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “McCormick 824 (A)”
How much does an 824 (A) weigh?
An 824 (A) weighs 6,934 lb (3,145 kg) unladen.
| Unladen weight | 6,934 lb · 3,145 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 83.5 in · 2,120 mm |
| Length | 131.4 in · 3,337 mmtwo-wheel-drive version |
| Width | 78.3 in · 1,990 mm |
| Height | 98.0 in · 2,489 mm |
| Ground clearance | 17.8 in · 453 mmtwo-wheel-drive version |
| Front track | 52.0–67.7 in · 1,320–1,720 mm |
| Rear track | 61.4–77.2 in · 1,560–1,960 mm |
| Turning radius, braked | 12.5 ft · 3.80 m |
Source · Traktorenlexikon, “McCormick 824 (A)”
Which tractors compare with an 824 (A)?
Within 10% of its 62.1 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Massey Ferguson MF 188 und 188 (A)62 hp PTO, claimed · from 1972Side by side with the 824 (A) →
- Güldner G 7562 hp PTO, claimed · 1965–1969Side by side with the 824 (A) →
- Renault 75-12 LS62.1 hp PTO, claimed · 1985–1989Side by side with the 824 (A) →
- Lamborghini R-704 (DT)62.2 hp PTO, claimed · 1976–1982Side by side with the 824 (A) →
- ZETOR 7711/774562.2 hp PTO, claimed · 1985–1993Side by side with the 824 (A) →
- Bührer Komfort 465 L (A)62.2 hp PTO, claimed · 1975–1977Side by side with the 824 (A) →
Everything else people ask
Is an 824 (A) two-wheel drive or four-wheel drive?
The International Harvester 824 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an 824 (A) have?
An 824 (A) has a independent 540/1000 rpm rear PTO.
What serial numbers does an 824 (A) carry?
The source prints serial numbers DO1 0001 D 201.000 to DO1 0001 D 206.559. It does not say whether that is the tractor’s or the engine’s number, and we never work out a year from a serial number.
Where this page comes from
Compiled from Traktorenlexikon, “McCormick 824 (A)”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: McCormick 824 (A) — CC BY-SA 4.0, WIKIBOOKS-TL-118109 · revision 1059864. Wikibooks contributors (Traktorenlexikon). Original document