- Vehicle type: unspecified
- WhichTractor size: Standard-size
- No lab test on file
- 1965–1969
- 149 built
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Güldner G 75 specs: hp, weight, years
Güldner 6 L 79 six-cylinder diesel.
- Weight
- 6,724 lb
- 3-point lift
- 4,762 lb
- Top speed
- 15.0 mph
Güldner G 75 specs: key facts
The Güldner G 75 was built from 1965 to 1969.
The Güldner G 75 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.Source 2
The Güldner G 75 has a Güldner 6 L 79 engine, a 6-cylinder 4.71 L diesel unit.
The Güldner G 75 weighs 3,050 kg (6,724 lb) unladen.
The Güldner G 75 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Güldner G 75 lifts 2,160.000 kg (4,762 lb) at the lower-link ends.
Source · Traktorenlexikon, “Güldner G 75”
How much horsepower does a G 75 have?
No sourced power figure for the G 75 is on record yet.
What engine is in a G 75?
A G 75 has a Güldner 6 L 79, a 6-cylinder 4.71 L diesel engine.
| Make & model | Güldner 6 L 79 |
|---|---|
| Cylinders | 6, air-cooled |
| Displacement | 287.5 ci · 4.71 L |
| Max torque | 174 lb·ft · 235 N·m |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Güldner G 75”
How much will a G 75 lift?
A G 75 lifts 4,762 lb (2,160.000 kg) at the lower-link ends.
| Pressure | 2,134 psi · 147 barSource 2 |
|---|---|
| Lift at ends | 4,762 lb · 2,160.000 kgFrom the article's hydraulics section of the Traktorenlexikon article. |
| Rear PTO | Independent, engine-driven, 540/1000 rpm |
| PTO shaft | 29 x 34,9 x 8,7 mm |
Source · Traktorenlexikon, “Güldner G 75”
What transmission does a G 75 have?
Transmission specifications for the G 75 are below.
| Clutch | Pedal-operated dry double clutch |
|---|---|
| Brakes | Pedal-operated hydraulic internal shoe brake acting on the side shafts |
| Steering | ZF spindle hydrostatic steering |
| Top speed | 15.0 mph · 24.1 km/h |
Source · Traktorenlexikon, “Güldner G 75”
How much does a G 75 weigh?
A G 75 weighs 6,724 lb (3,050 kg) unladen.
| Unladen weight | 6,724 lb · 3,050 kg |
|---|---|
| Maximum permissible mass | 11,023 lb · 5,000 kg |
| Maximum front axle load | 4,409 lb · 2,000 kg |
| Maximum rear axle load | 7,937 lb · 3,600 kg |
| Wheelbase | 95.1 in · 2,416 mm |
| Length | 159.4–165.4 in · 4,050–4,200 mmthe article lists alternatives |
| Width | 76.6 in · 1,945 mm |
| Height | 65.0 in · 1,650 mm |
| Ground clearance | 15.7 in · 400 mm |
| Front track | 59.1–59.4 in · 1,500–1,510 mmWikibooks gives one track for both axles; the article lists alternatives |
| Rear track | 59.1–59.4 in · 1,500–1,510 mmWikibooks gives one track for both axles; the article lists alternatives |
| Turning radius, braked | 11.7 ft · 3.58 m |
Source · Traktorenlexikon, “Güldner G 75”
What oil does a G 75 take, and how much?
A G 75 engine takes 20.1 qt (19.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 20.1 qt · 19.0 LSource: Traktorenlexikon, “Güldner G 75” · single source, not independently verified |
| Transmission | 4.2 qt · 4.0 LSource: Traktorenlexikon, “Güldner G 75” · single source, not independently verified |
| Hydraulic | 9.5 qt · 9.0 LSource: Traktorenlexikon, “Güldner G 75” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a G 75?
Within 10% of its 62 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- International Harvester 824 (A)62.1 hp PTO, claimed · 1971–1974Side by side with the G 75 →
- Massey Ferguson 188 und 188 (A)62 hp PTO, claimed · from 1972Side by side with the G 75 →
- Bührer Komfort 465 L (A)62.2 hp PTO, claimed · 1975–1977Side by side with the G 75 →
- Volvo T 65061.8 hp PTO, claimed · 1970–1982Side by side with the G 75 →
- VOLVO-BM T 65061.8 hp PTO, claimed · 1970–1982Side by side with the G 75 →
- Massey Ferguson 28561.8 hp PTO, claimed · 1975–1982Side by side with the G 75 →
Common questions about the Güldner G 75
Is a G 75 two-wheel drive or four-wheel drive?
The Güldner G 75 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a G 75 have?
A G 75 has a independent 540/1000 rpm rear PTO on a 29 x 34,9 x 8,7 mm shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Güldner G 75”; and Traktorenlexikon, “Güldner G 75A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Güldner G 75 — CC BY-SA 4.0, WIKIBOOKS-TL-16564 · revision 1078741. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Güldner G 75A — CC BY-SA 4.0, WIKIBOOKS-TL-49103 · revision 1056068. Wikibooks contributors (Traktorenlexikon). Original document