• Rigid chassis
  • WhichTractor size: Compact
  • No lab test on file
  • 1980–1990

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

IMT 539 specs: hp, weight, years

IMR M-33/T-LP three-cylinder diesel. The manufacturer claimed 38.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

38.5 hp

28.7 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IMT 539”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
3,175 lb
3-point lift
2,249 lb
Hyd. flow
4.2 gpm
Top speed
14.9 mph

IMT 539 specs: key facts

  • The IMT 539 was built from 1980 to 1990.

  • The IMT 539 has a claimed engine power (gross or net not stated) of 28.7 kW (38.5 hp); it has no measured PTO figure.

  • The IMT 539 is two-wheel drive (2WD).

  • The IMT 539 has a IMR M-33/T-LP engine, a 3-cylinder 2.50 L diesel unit.

  • The IMT 539 weighs 1,440 kg (3,175 lb) unladen.

  • The IMT 539 has a rear PTO running at 540 rpm.

  • The three-point hitch of the IMT 539 lifts 1,020 kg (2,249 lb) at the lower-link ends.

  • The hydraulic pump of the IMT 539 delivers 16.0 L/min (4.2 gpm).

Source · Traktorenlexikon, “IMT 539”

How does the 539 compare with its class?

  • Limitation:

    A 35 L fuel tank is low for its class — 30% below the median of 50 L across the 162 machines within 10% of its power that hold this figure.

  • Worth knowing:

    An unladen mass of 1,440 kg is low for its class — 23% below the median of 1,869 kg across the 176 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 176 comparable records. How we work this out

Illustration of the 1980–1990 IMT 539, a 38 hp farm tractor, cab was optional — shown without it · colour not recorded — shown unpainted, a drawing generated from its specification record
Illustration — not a photograph · cab was optional — shown without it · colour not recorded — shown unpainted

How much horsepower does a 539 have?

The only figure for the 539 is 38.5 hp (28.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
38.5 hp

Source · Traktorenlexikon, “IMT 539”

What engine is in a 539?

A 539 has an IMR M-33/T-LP, a 3-cylinder 2.50 L diesel engine.

Engine — 539 engine specifications
Make & modelIMR M-33/T-LP
Cylinders3, liquid-cooled
Displacement152.7 ci · 2.50 L
Max torque111 lb·ft · 150 N·m @ 1,300 rpm
Electrical system12 V

Source · Traktorenlexikon, “IMT 539”

How much will a 539 lift, and what is its hydraulic flow?

A 539 lifts 2,249 lb (1,020 kg) at the lower-link ends of its Category 1 three-point hitch.

Hydraulics & PTO — 539 hydraulics and PTO specifications
Pump flow4.2 gpm · 16.0 L/min
Hitch categoryCategory 1
Lift at ends2,249 lb · 1,020 kg
Rear PTO540 rpm @ 1,500 engine rpm

Source · Traktorenlexikon, “IMT 539”

What transmission does a 539 have?

Transmission specifications for the 539 are below.

Transmission — 539 transmission specifications
ClutchPedal-operated, dry two-stage IKARUS-ZEMUM double clutch
BrakesPedal-operated FAK-LOZNICA internal shoe brake, designed as band brake and steering brake
SteeringMechanically operated worm steering
Top speed14.9 mph · 24 km/h

Source · Traktorenlexikon, “IMT 539”

How much does a 539 weigh?

A 539 weighs 3,175 lb (1,440 kg) unladen.

Weights & dimensions — 539 weights and dimensions
Unladen weight3,175 lb · 1,440 kg
Wheelbase72.0 in · 1,830 mm
Length117.0 in · 2,972 mm
Width64.0 in · 1,625 mm
Height54.0 in · 1,372 mm
Ground clearance21.0 in · 533 mm
Front track47.2–78.7 in · 1,200–2,000 mm
Rear track47.2–74.8 in · 1,200–1,900 mm
Turning radius, braked9.7 ft · 2.95 m

Source · Traktorenlexikon, “IMT 539”

What oil does a 539 take, and how much?

A 539 engine takes 7.4 qt (7.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

539 fluid capacities, grades and service intervals
SystemCapacity
Engine oil7.4 qt · 7.0 LSource: Traktorenlexikon, “IMT 539” · single source, not independently verified
Transmission & hydraulic31.7 qt · 30.0 LSource: Traktorenlexikon, “IMT 539” · single source, not independently verified
Cooling system9.0 qt · 8.5 LSource: Traktorenlexikon, “IMT 539” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 539?

Within 10% of its 38.5 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the IMT 539

Is a 539 two-wheel drive or four-wheel drive?

The IMT 539 is two-wheel drive (2WD).

What PTO does a 539 have?

A 539 has a 540 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “IMT 539”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IMT 539 — CC BY-SA 4.0, WIKIBOOKS-TL-120881 · revision 1057769. Wikibooks contributors (Traktorenlexikon). Original document