4 material differences · fewer than 12

Tractor oneIMT 5391980–1990No measured PTO figureTractor twoLamborghini R-240 (DT)1970–1973No measured PTO figure

Which should you choose?

Read our verdict on the 539 and the R-240 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

4 material differences · 7 fields identical or within 5%, which is not counted as material

IMT 539 and Lamborghini R-240 (DT), field by field
Field539R-240 (DT)Gap
Engine
Engine power, claimed claimed38.5 hp38.5 hp—
Engine declaredIMR M-33/T-LPLAMBORGHINI FL-1002differs
Displacement declared2.50 L1.89 L+33% 539
Maximum torque declared111 lb·ft · 150 N·m——
Transmission
Top speed declared14.9 mph · 24 km/h15.5 mph · 25 km/h—
Clutch declaredPedal-operated, dry two-stage IKARUS-ZEMUM double clutch——
Hydraulics & hitch
Pump flow declared4.2 gpm · 16.0 L/min4.4 gpm · 16.7 L/min—
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,175 lb · 1,440 kg3,748 lb · 1,700 kg+18% R-240 (DT)
Wheelbase declared72.0 in · 1,830 mm70.5 in · 1,790 mm—
Length declared117.0 in · 2,972 mm112.6 in · 2,860 mm—
Width declared64.0 in · 1,625 mm65.0 in · 1,650 mm—
Ground clearance declared21.0 in · 533 mm16.5 in · 420 mm+27% 539
Turning radius, braked declared9.7 ft · 2.95 m——
Fuel tank declared37.0 qt · 35.0 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

IMT 539 sources

Source
  • Source: Traktorenlexikon, “IMT 539”

Lamborghini R-240 (DT) sources

Source
  • Source: Traktorenlexikon, “Lamborghini R 240 (DT)”