11 material differences · fewer than 12

Tractor oneFendt Farmer 1021972–1974No measured PTO figureTractor twoIMT 5391980–1990No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (59%); the drive differs (2WD / 4WD; 2WD); they were not built in overlapping years (1972–1974; 1980–1990). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fendt Farmer 102 and IMT 539, field by field
FieldFarmer 102539Gap
Engine
Engine power, claimed claimed39.3 hp38.5 hp—
Engine declared3 D 325-3IMR M-33/T-LPdiffers
Displacement declared2.55 L2.50 L—
Maximum torque declared—111 lb·ft · 150 N·m—
Transmission
Top speed declared16.0 mph · 25.8 km/h14.9 mph · 24 km/h+8% Farmer 102
Clutch declaredDouble-sprung Tornado single-disc dry clutch for normal drivingPedal-operated, dry two-stage IKARUS-ZEMUM double clutchdiffers
Hydraulics & hitch
Pump flow declared8.0 gpm · 30.5 L/min4.2 gpm · 16.0 L/min+91% Farmer 102
Pressure declared2,489 psi · 172 bar——
Rear PTO speeds declared559 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared5,049 lb · 2,290 kg3,175 lb · 1,440 kg+59% Farmer 102
Maximum permissible mass declared8,433 lb · 3,825 kg——
Wheelbase declared82.0 in · 2,083 mm72.0 in · 1,830 mm+14% Farmer 102
Length declared142.7 in · 3,625 mm117.0 in · 2,972 mm+22% Farmer 102
Width declared67.2 in · 1,706 mm64.0 in · 1,625 mm—
Ground clearance declared15.2 in · 385 mm21.0 in · 533 mm+38% 539
Turning radius, braked declared12.0 ft · 3.65 m9.7 ft · 2.95 m+24% Farmer 102
Fuel tank declared68.7 qt · 65 L37.0 qt · 35.0 L+86% Farmer 102

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Farmer 102 sources

Source
  • Source: Traktorenlexikon, “Fendt Farmer 102”
  • Source: Traktorenlexikon, “Fendt Farmer 102 S/SA”

IMT 539 sources

Source
  • Source: Traktorenlexikon, “IMT 539”