- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1979–1983
- 1,263 built
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Hürlimann H-360 (A) Full specifications
Hürlimann H 1103 three-cylinder diesel. The manufacturer claimed 61.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
61.2 hp
45.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Hürlimann H 360”, claimed
- Weight
- 5,159 lb
- 3-point lift
- 3,889 lb
- Hyd. flow
- 8.9 gpm
- Top speed
- 15.5 mph
Hürlimann H-360 (A) specs: key facts
The Hürlimann H-360 (A) was built from 1979 to 1983.
The Hürlimann H-360 (A) has a claimed engine power (gross or net not stated) of 45.6 kW (61.2 hp); it has no measured PTO figure.
The Hürlimann H-360 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Hürlimann H-360 (A) has a Hürlimann H 1103 engine, a 3-cylinder 3.42 L diesel unit.
The Hürlimann H-360 (A) weighs 2,340 kg (5,159 lb) unladen.
The Hürlimann H-360 (A) has a rear PTO running at 540/1000 rpm.
The three-point hitch of the Hürlimann H-360 (A) lifts 1,764 kg (3,889 lb) at the lower-link ends.
The hydraulic pump of the Hürlimann H-360 (A) delivers 33.8 L/min (8.9 gpm).
Source · Traktorenlexikon, “Hürlimann H 360”
How much horsepower does a H-360 (A) have?
The only figure for the H-360 (A) is 61.2 hp (45.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Hürlimann H 360”
What engine is in a H-360 (A)?
A H-360 (A) has a Hürlimann H 1103, a 3-cylinder 3.42 L diesel engine.
| Make & model | Hürlimann H 1103 |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 208.8 ci · 3.42 L |
| Max torque | 169 lb·ft · 229 N·m @ 1,250 rpm |
Source · Traktorenlexikon, “Hürlimann H 360”
How much will a H-360 (A) lift, and what is its hydraulic flow?
A H-360 (A) lifts 3,889 lb (1,764 kg) at the lower-link ends.
| Pump flow | 8.9 gpm · 33.8 L/min |
|---|---|
| Lift at ends | 3,889 lb · 1,764 kg |
| Rear PTO | 540/1000 rpm @ 1,938 engine rpm |
| PTO shaft | 1 3/8"- 6 splines (Form-A) |
Source · Traktorenlexikon, “Hürlimann H 360”
What transmission does a H-360 (A) have?
Transmission specifications for the H-360 (A) are below.
| Clutch | Dry SAME double clutch |
|---|---|
| Steering | Hydrostatically operated steering |
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Hürlimann H 360”
How much does a H-360 (A) weigh?
A H-360 (A) weighs 5,159 lb (2,340 kg) unladen.
| Unladen weight | 5,159 lb · 2,340 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 83.9 in · 2,131 mm |
| Length | 124.0 in · 3,150 mm |
| Width | 72.0 in · 1,830 mm |
| Height | 65.0 in · 1,650 mm |
| Ground clearance | 16.5 in · 420 mmtwo-wheel-drive version |
| Front track | 56.3–75.2 in · 1,430–1,910 mmtwo-wheel-drive version |
| Rear track | 59.8–87.4 in · 1,520–2,220 mm |
Source · Traktorenlexikon, “Hürlimann H 360”
Which tractors compare with a H-360 (A)?
Within 10% of its 46.8 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- David Brown 990 (A)46.8 hp PTO, claimed · 1971–1976Side by side with the H-360 (A) →
- Landini 6030 (DT) TL-39 N/B (TL-39 DT/B)46.8 hp PTO, claimed · 1983–1987Side by side with the H-360 (A) →
- Ford 4600 (A)46.7 hp PTO, claimed · 1975–1981Side by side with the H-360 (A) →
- Fiat 55-90 (DT)46.7 hp PTO, claimed · 1984–1992Side by side with the H-360 (A) →
- URSUS C-36046.7 hp PTO, claimed · 1976–1994Side by side with the H-360 (A) →
- URSUS C-36246.7 hp PTO, claimed · 1976–1987Side by side with the H-360 (A) →
Everything else people ask
Is a H-360 (A) two-wheel drive or four-wheel drive?
The Hürlimann H-360 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a H-360 (A) have?
A H-360 (A) has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines (Form-A) shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Hürlimann H 360”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Hürlimann H 360 — CC BY-SA 4.0, WIKIBOOKS-TL-104968 · revision 1005175. Wikibooks contributors (Traktorenlexikon). Original document