Hürlimann H-360 (A) vs OLIVER 1355 (4 WD)

9 material differences · fewer than 12

Tractor one

1979–1983

No measured PTO figure

Tractor two

1969–1971

No measured PTO figure

Which should you choose?

Read our verdict on the H-360 (A) and the 1355 (4 WD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Hürlimann H-360 (A) and OLIVER 1355 (4 WD), field by field
Field	H-360 (A)	1355 (4 WD)	Gap
Engine
Engine power, claimed claimed	61.2 hp	54.3 hp	+13% H-360 (A)
Engine declared	Hürlimann H 1103	FIAT 854 A	differs
Displacement declared	3.42 L	3.12 L	+10% H-360 (A)
Maximum torque declared	169 lb·ft · 229 N·m	137 lb·ft · 186 N·m	+23% H-360 (A)
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	Dry SAME double clutch	—	—
Hydraulics & hitch
Pump flow declared	8.9 gpm · 33.8 L/min	5.8 gpm · 21.8 L/min	+55% H-360 (A)
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	3,889 lb · 1,764 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,159 lb · 2,340 kg	4,409 lb · 2,000 kg	+17% H-360 (A)
Wheelbase declared	83.9 in · 2,131 mm	81.5 in · 2,070 mm	—
Length declared	124.0 in · 3,150 mm	122.0 in · 3,099 mm	—
Width declared	72.0 in · 1,830 mm	70.0 in · 1,778 mm	—
Height declared	65.0 in · 1,650 mm	60.6 in · 1,539 mm	+7% H-360 (A)
Ground clearance declared	16.5 in · 420 mm	18.8 in · 478 mm	+14% 1355 (4 WD)
Turning radius, braked declared	—	10.3 ft · 3.13 m	—
Fuel tank declared	63.4 qt · 60.0 L	57.1 qt · 54.0 L	+11% H-360 (A)

Source

Source