10 material differences · fewer than 12
Tractor oneHürlimann H-360 (A)1979–1983No measured PTO figureTractor twoURSUS C-3601976–1994No measured PTO figure
Which should you choose?
Read our verdict on the H-360 (A) and the C-360 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | H-360 (A) | C-360 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 61.2 hp | 51.2 hp | +19% H-360 (A) |
| Engine declared | Hürlimann H 1103 | URSUS/ZM S-4003 | differs |
| Displacement declared | 3.42 L | 3.12 L | +10% H-360 (A) |
| Maximum torque declared | 169 lb·ft · 229 N·m | 140 lb·ft · 190 N·m | +21% H-360 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Dry SAME double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.9 gpm · 33.8 L/min | 6.9 gpm · 26.3 L/min | +29% H-360 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,159 lb · 2,340 kg | 4,784 lb · 2,170 kg | +8% H-360 (A) |
| Wheelbase declared | 83.9 in · 2,131 mm | 83.7 in · 2,125 mm | — |
| Length declared | 124.0 in · 3,150 mm | 140.6 in · 3,571 mm | +13% C-360 |
| Width declared | 72.0–100.4 in · 1,830–2,550 mm | 70.9 in · 1,800 mm | differs |
| Ground clearance declared | 16.5 in · 420 mm | 15.6 in · 395 mm | +6% H-360 (A) |
| Turning radius, braked declared | — | 11.1 ft · 3.37 m | — |
| Fuel tank declared | 63.4 qt · 60.0 L | 74.0 qt · 70.0 L | +17% C-360 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann H-360 (A) sources
- Source: Traktorenlexikon, “Hürlimann H 360”
URSUS C-360 sources
- Source: Traktorenlexikon, “Ursus C-360”