10 material differences · fewer than 12
Tractor oneFendt Favorit 510 C1993–2000No measured PTO figureTractor twoFord 8100 A1978–1981No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 510 C and the 8100 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Favorit 510 C | 8100 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.1 hp | 103 hp | — |
| Engine declared | MWM TD 226. B-4 | Ford 2714 E | differs |
| Displacement declared | 4.16 L | 6.22 L | +50% 8100 A |
| Maximum torque declared | 308 lb·ft · 417 N·m | 274 lb·ft · 372 N·m | +12% Favorit 510 C |
| Transmission | |||
| Top speed declared | 24.9–31.1 mph · 40–50 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Wet multi-disc drive clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 26.9 gpm · 102.0 L/min | 9.2 gpm · 35.0 L/min | +191% Favorit 510 C |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,957 lb · 4,970 kg | 10,637 lb · 4,825 kg | — |
| Maximum permissible mass declared | — | 14,991 lb · 6,800 kg | — |
| Wheelbase declared | 91.9 in · 2,333 mm | 114.8 in · 2,915 mm | +25% 8100 A |
| Length declared | 164.6 in · 4,180 mm | 181.7 in · 4,615 mm | +10% 8100 A |
| Width declared | 89.8 in · 2,280 mm | 79.1 in · 2,010 mm | +13% Favorit 510 C |
| Ground clearance declared | 21.1 in · 536 mm | 22.8–26.5 in · 578–673 mm | differs |
| Turning radius, braked declared | 13.1 ft · 4.00 m | — | — |
| Fuel tank declared | 142.7 qt · 135 L | 211.3 qt · 200 L | +48% 8100 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 510 C sources
- Source: Traktorenlexikon, “Fendt Favorit 510 C”
- Source: Traktorenlexikon, “Fendt Farmer 308”
Ford 8100 A sources
- Source: Traktorenlexikon, “Ford 8100”