10 material differences · fewer than 12
Tractor oneFendt Favorit 611 SA1972–1976No measured PTO figureTractor twoFord 8100 A1978–1981No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 611 SA and the 8100 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Favorit 611 SA | 8100 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.1 hp | 103 hp | — |
| Engine declared | MWM D 226-6 | Ford 2714 E | differs |
| Displacement declared | 6.23 L | 6.22 L | — |
| Maximum torque declared | 267 lb·ft · 362 N·m | 274 lb·ft · 372 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Favorit 611 SA |
| Hydraulics & hitch | |||
| Pump flow declared | 9.9 gpm · 37.6 L/min | 9.2 gpm · 35.0 L/min | +7% Favorit 611 SA |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,778 lb · 4,435 kg | 10,637 lb · 4,825 kg | +9% 8100 A |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | 14,991 lb · 6,800 kg | — |
| Wheelbase declared | 103.0 in · 2,617 mm | 114.8 in · 2,915 mm | +11% 8100 A |
| Length declared | 172.5 in · 4,382 mm | 181.7 in · 4,615 mm | +5% 8100 A |
| Width declared | 84.8–91.9 in · 2,154–2,334 mm | 79.1 in · 2,010 mm | differs |
| Ground clearance declared | 16.9 in · 430 mm | 22.8–26.5 in · 578–673 mm | differs |
| Turning radius, braked declared | 17.7 ft · 5.39 m | — | — |
| Fuel tank declared | 137.4 qt · 130 L | 211.3 qt · 200 L | +54% 8100 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 611 SA sources
- Source: Traktorenlexikon, “Fendt Favorit 611 SA”
- Source: Traktorenlexikon, “Fendt Favorit 612 S”
Ford 8100 A sources
- Source: Traktorenlexikon, “Ford 8100”