- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- 1990–1999
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Ford 3930 (A) specs: hp, weight, years
Ford C 201 CID-NA three-cylinder diesel. The manufacturer claimed 50.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
50.3 hp
37.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 3930”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 6,045 lb
- 3-point lift
- 4,299 lb
- Hyd. flow
- 8.8 gpm
- Top speed
- 18.6 mph
Ford 3930 (A) specs: key facts
The Ford 3930 (A) was built from 1990 to 1999.
The Ford 3930 (A) has a claimed engine power (gross or net not stated) of 37.5 kW (50.3 hp); it has no measured PTO figure.
The Ford 3930 (A) was offered in two-wheel-drive and four-wheel-drive versions.
The Ford 3930 (A) has a Ford C 201 CID-NA engine, a 3-cylinder 3.29 L diesel unit.
The Ford 3930 (A) weighs 2,742 kg (6,045 lb) unladen.
The Ford 3930 (A) has an independent rear PTO running at 540 rpm.
The three-point hitch of the Ford 3930 (A) lifts 1,950 kg (4,299 lb) at the lower-link ends.
The hydraulic pump of the Ford 3930 (A) delivers 33.2 L/min (8.8 gpm).
Source · Traktorenlexikon, “Ford 3930”
How much horsepower does a 3930 (A) have?
The only figure for the 3930 (A) is 50.3 hp (37.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Ford 3930”
What engine is in a 3930 (A)?
A 3930 (A) has a Ford C 201 CID-NA, a 3-cylinder 3.29 L diesel engine.
| Make & model | Ford C 201 CID-NA |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 200.8 ci · 3.29 L |
| Max torque | 137 lb·ft · 186 N·m @ 1,100 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Ford 3930”
How much will a 3930 (A) lift, and what is its hydraulic flow?
A 3930 (A) lifts 4,299 lb (1,950 kg) at the lower-link ends.
| System | Open centre |
|---|---|
| Pump flow | 8.8 gpm · 33.2 L/min |
| Pressure | 1,378–1,450 psi · 95–100 bar |
| Lift at ends | 4,299 lb · 1,950 kg |
| Rear PTO | Independent, engine-driven, 540 rpm @ 1,756 engine rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines (Form-1) |
Source · Traktorenlexikon, “Ford 3930”
What transmission does a 3930 (A) have?
Transmission specifications for the 3930 (A) are below.
| Clutch | Pedal-operated dry AP single-disc clutch |
|---|---|
| Steering | Hydrostatic Ford-New Holland steering with double-acting steering cylinder |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Ford 3930”
How much does a 3930 (A) weigh?
A 3930 (A) weighs 6,045 lb (2,742 kg) unladen.
| Unladen weight | 6,045 lb · 2,742 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 84.5 in · 2,146 mmtwo-wheel-drive version |
| Length | 138.8 in · 3,525 mmtwo-wheel-drive version |
| Width | 69.7 in · 1,771 mm |
| Height | 96.0 in · 2,438 mm |
| Ground clearance | 12.2 in · 310 mm |
| Front track | 50.9–79.0 in · 1,293–2,007 mmtwo-wheel-drive version |
| Rear track | 59.6–79.8 in · 1,515–2,026 mm |
Source · Traktorenlexikon, “Ford 3930”
What oil does a 3930 (A) take, and how much?
A 3930 (A) engine takes 7.0 qt (6.6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.0 qt · 6.6 LSource: Traktorenlexikon, “Ford 3930” · single source, not independently verified |
| Transmission | 9.9 qt · 9.4 LSource: Traktorenlexikon, “Ford 3930” · single source, not independently verified |
| Hydraulic | 35.8 qt · 33.9 LSource: Traktorenlexikon, “Ford 3930” · single source, not independently verified |
| Front axle | 5.8 qt · 5.5 LSource: Traktorenlexikon, “Ford 3930” · single source, not independently verified |
| Cooling system | 11.0 qt · 10.4 LSource: Traktorenlexikon, “Ford 3930” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 3930 (A)?
Within 10% of its 50.3 hp of claimed engine power, the same type, and first built within 15 years of it.
- ZETOR 3320/334050.3 hp engine, claimed · 1993–1997Side by side with the 3930 (A) →
- DEUTZ-ALLIS 625050.3 hp engine, claimed · 1986–1990Side by side with the 3930 (A) →
- Dexheimer Allrad 345N50 hp engine, claimed · 1976–1985Side by side with the 3930 (A) →
- Fendt Farmer 303 LSA51.1 hp engine, claimed · 1982–1985Side by side with the 3930 (A) →
- CASE-INTERNATIONAL 495 (DT)51.2 hp engine, claimed · 1990–1993Side by side with the 3930 (A) →
- AGCO-ALLIS 465049.3 hp engine, claimed · 1991–1997Side by side with the 3930 (A) →
Common questions about the Ford 3930 (A)
Is a 3930 (A) two-wheel drive or four-wheel drive?
The Ford 3930 (A) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 3930 (A) have?
A 3930 (A) has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Ford 3930”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 3930 — CC BY-SA 4.0, WIKIBOOKS-TL-91318 · revision 919073. Wikibooks contributors (Traktorenlexikon). Original document