- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- 1983–1986
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Ford 1910 (A) specs: hp, weight, years
ISHIKAWAJIMA-SHIBAURA T-853 A three-cylinder diesel. The manufacturer claimed 31.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
31.5 hp
23.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 1910”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 3,040 lb
- 3-point lift
- 3,816 lb
- Hyd. flow
- 8.6 gpm
- Top speed
- 12.4 mph
Ford 1910 (A) specs: key facts
The Ford 1910 (A) was built from 1983 to 1986.
The Ford 1910 (A) has a claimed engine power (gross or net not stated) of 23.5 kW (31.5 hp); it has no measured PTO figure.
The Ford 1910 (A) was offered in two-wheel-drive and four-wheel-drive versions.
The Ford 1910 (A) has a ISHIKAWAJIMA-SHIBAURA T-853 A engine, a 3-cylinder 1.70 L diesel unit.
The Ford 1910 (A) weighs 1,379 kg (3,040 lb) unladen.
The Ford 1910 (A) has a rear PTO running at 540 rpm.
The three-point hitch of the Ford 1910 (A) lifts 1,731 kg (3,816 lb) at the lower-link ends.
The hydraulic pump of the Ford 1910 (A) delivers 32.5 L/min (8.6 gpm).
Source · Traktorenlexikon, “Ford 1910”
How does the 1910 (A) compare with its class?
- Strength:
A hydraulic pump flow of 32.5 L/min is high for its class — 81% above the median of 18 L/min across the 102 machines within 10% of its power that hold this figure.
- Limitation:
A maximum engine torque of 96.1 N·m is low for its class — 22% below the median of 123 N·m across the 102 machines within 10% of its power that hold this figure.
- Strength:
Twelve forward gears is high for its class — 100% above the median of 6 across the 169 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 169 comparable records. How we work this out
How much horsepower does a 1910 (A) have?
The only figure for the 1910 (A) is 31.5 hp (23.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Ford 1910”
What engine is in a 1910 (A)?
A 1910 (A) has an ISHIKAWAJIMA-SHIBAURA T-853 A, a 3-cylinder 1.70 L diesel engine.
| Make & model | ISHIKAWAJIMA-SHIBAURA T-853 A |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 103.9 ci · 1.70 L |
| Max torque | 71 lb·ft · 96.1 N·m @ 2,000 rpm |
| Injection | direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Ford 1910”
How much will a 1910 (A) lift, and what is its hydraulic flow?
A 1910 (A) lifts 3,816 lb (1,731 kg) at the lower-link ends of its Category 1 three-point hitch.
| Pump flow | 8.6 gpm · 32.5 L/min |
|---|---|
| Hitch category | Category 1 |
| Lift at ends | 3,816 lb · 1,731 kg |
| Rear PTO | 540 rpm @ 2,454 engine rpm |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Ford 1910”
What transmission does a 1910 (A) have?
Transmission specifications for the 1910 (A) are below.
| Clutch | Pedal-operated dry DAIKIN double clutch |
|---|---|
| Brakes | Pedal-operated ISHIKAWAJIMA-SHIBAURA drum brake acting on rear wheels |
| Top speed | 12.4 mph · 20 km/h |
Source · Traktorenlexikon, “Ford 1910”
How much does a 1910 (A) weigh?
A 1910 (A) weighs 3,040 lb (1,379 kg) unladen.
| Unladen weight | 3,040 lb · 1,379 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 66.3 in · 1,684 mmtwo-wheel-drive version |
| Length | 122.4 in · 3,110 mmtwo-wheel-drive version |
| Width | 57.5 in · 1,460 mm |
| Height | 86.6 in · 2,200 mm |
| Ground clearance | 13.4 in · 340 mmtwo-wheel-drive version |
| Front track | 43.5–57.5 in · 1,105–1,461 mmtwo-wheel-drive version |
| Rear track | 45.7–61.0 in · 1,161–1,549 mm |
| Turning radius, braked | 8.0 ft · 2.45 m |
Source · Traktorenlexikon, “Ford 1910”
What oil does a 1910 (A) take, and how much?
A 1910 (A) engine takes 6.9 qt (6.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 6.9 qt · 6.5 LSource: Traktorenlexikon, “Ford 1910” · single source, not independently verified |
| Transmission & hydraulic | 29.6 qt · 28.0 LSource: Traktorenlexikon, “Ford 1910” · single source, not independently verified |
| Cooling system | 7.4 qt · 7.0 LSource: Traktorenlexikon, “Ford 1910” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 1910 (A)?
Within 10% of its 31.5 hp of claimed engine power, the same type, and first built within 15 years of it.
- Ford 1920 (A)31.5 hp engine, claimed · 1987–2000Side by side with the 1910 (A) →
- WHITE 2-3530.6 hp engine, claimed · 1979–1984Side by side with the 1910 (A) →
- Fiat 350 / Spezial (DT)32.6 hp engine, claimed · 1968–1974Side by side with the 1910 (A) →
- DEUTZ-ALLIS 603533.0 hp engine, claimed · 1986Side by side with the 1910 (A) →
- UTB 302 Dtce-IF29.6 hp engine, claimed · 1980–1991Side by side with the 1910 (A) →
- Hermann Lanz D 63433.4 hp engine, claimed · 1974–1978Side by side with the 1910 (A) →
Common questions about the Ford 1910 (A)
Is a 1910 (A) two-wheel drive or four-wheel drive?
The Ford 1910 (A) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 1910 (A) have?
A 1910 (A) has a 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Ford 1910”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 1910 — CC BY-SA 4.0, WIKIBOOKS-TL-110286 · revision 918448. Wikibooks contributors (Traktorenlexikon). Original document