10 material differences · fewer than 12
Tractor oneFord 1910 (A)1983–1986No measured PTO figureTractor twoUTB 302 Dtce-IF1980–1991No measured PTO figure
Which should you choose?
Read our verdict on the 1910 (A) and the 302 Dtce-IF → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 1910 (A) | 302 Dtce-IF | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 31.5 hp | 29.6 hp | +6% 1910 (A) |
| Engine declared | ISHIKAWAJIMA-SHIBAURA T-853 A | UTB D-111.057 | differs |
| Displacement declared | 1.70 L | 1.80 L | +6% 302 Dtce-IF |
| Maximum torque declared | 71 lb·ft · 96.1 N·m | 82 lb·ft · 111 N·m | +16% 302 Dtce-IF |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 15.5 mph · 25 km/h | +25% 302 Dtce-IF |
| Clutch declared | Pedal-operated dry DAIKIN double clutch | Pedal-operated, dry two-stage double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.6 gpm · 32.5 L/min | 6.6 gpm · 25.0 L/min | +30% 1910 (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,040 lb · 1,379 kg | 6,118 lb · 2,775 kg | +101% 302 Dtce-IF |
| Wheelbase declared | 66.3 in · 1,684 mm | 70.9 in · 1,800 mm | +7% 302 Dtce-IF |
| Length declared | 122.4 in · 3,110 mm | 110.4 in · 2,805 mm | +11% 1910 (A) |
| Width declared | 57.5 in · 1,460 mm | 59.4 in · 1,510 mm | — |
| Ground clearance declared | 13.4 in · 340 mm | — | — |
| Turning radius, braked declared | 8.0 ft · 2.45 m | — | — |
| Fuel tank declared | 36.8 qt · 34.8 L | 57.1 qt · 54.0 L | +55% 302 Dtce-IF |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 1910 (A) sources
- Source: Traktorenlexikon, “Ford 1910”
UTB 302 Dtce-IF sources
- Source: Traktorenlexikon, “UTB U 302 DTCE IF”