7 material differences · fewer than 12

Tractor oneFord 1910 (A)1983–1986No measured PTO figureTractor twoHermann Lanz D 6341974–1978No measured PTO figure

Which should you choose?

Read our verdict on the 1910 (A) and the D 634 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 3 fields identical or within 5%, which is not counted as material

Ford 1910 (A) and Hermann Lanz D 634, field by field
Field1910 (A)D 634Gap
Engine
Engine power, claimed claimed31.5 hp33.4 hp+6% D 634
Engine declaredISHIKAWAJIMA-SHIBAURA T-853 AMWM D 226-2differs
Displacement declared1.70 L2.08 L+22% D 634
Maximum torque declared71 lb·ft · 96.1 N·m——
Transmission
Top speed declared12.4 mph · 20 km/h17.5 mph · 28.1 km/h+41% D 634
Clutch declaredPedal-operated dry DAIKIN double clutch——
Hydraulics & hitch
Pump flow declared8.6 gpm · 32.5 L/min——
Rear PTO speeds declared540 rpm580/1120 rpmdiffers
Weight & dimensions
Unladen weight declared3,040 lb · 1,379 kg3,924 lb · 1,780 kg+29% D 634
Wheelbase declared66.3 in · 1,684 mm81.9 in · 2,080 mm+24% D 634
Length declared122.4 in · 3,110 mm129.9 in · 3,300 mm+6% D 634
Width declared57.5 in · 1,460 mm59.8 in · 1,520 mm—
Ground clearance declared13.4 in · 340 mm13.0 in · 330 mm—
Turning radius, braked declared8.0 ft · 2.45 m——
Fuel tank declared36.8 qt · 34.8 L37.0 qt · 35 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Ford 1910 (A) sources

Source
  • Source: Traktorenlexikon, “Ford 1910”

Hermann Lanz D 634 sources

Source
  • Source: Traktorenlexikon, “HELA D634”