0 material differences · fewer than 12
Tractor oneFiat 940 (DT)1978–1979No measured PTO figureTractor twoSOMECA 940 (TD)1978–1979No measured PTO figure
Which should you choose?
Read our verdict on the 940 (DT) and the 940 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
0 material differences · 14 fields identical or within 5%, which is not counted as material
| Field | 940 (DT) | 940 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.8 hp | 90.8 hp | — |
| Engine declared | O.M.-FIAT CO 3/80 | O.M.-FIAT CO 3/80 | — |
| Displacement declared | 4.94 L | 4.94 L | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Dry FEREDO double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.0 gpm · 38.0 L/min | — | — |
| Pressure declared | 2,901 psi · 200 bar | 2,901 psi · 200 bar | — |
| Three-point lift, at the coupling points declared | 8,378 lb · 3,800 kg | 8,378 lb · 3,800 kg | — |
| Rear PTO speeds declared | — | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,708 lb · 3,950 kg | 8,708 lb · 3,950 kg | — |
| Wheelbase declared | 93.3 in · 2,370 mm | 93.3 in · 2,370 mm | — |
| Length declared | 159.4 in · 4,050 mm | 159.4 in · 4,050 mm | — |
| Width declared | 76.2–99.7 in · 1,935–2,532 mm | 76.2–99.7 in · 1,935–2,532 mm | — |
| Height, over the cab declared | 105.1 in · 2,670 mm | 105.1 in · 2,670 mm | — |
| Ground clearance declared | 22.4 in · 570 mm | 22.4 in · 570 mm | — |
| Turning radius, braked declared | 12.6 ft · 3.84 m | 12.6 ft · 3.84 m | — |
| Fuel tank declared | 95.1 qt · 90.0 L | 95.1 qt · 90.0 L | — |
Fiat 940 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 940/940 DT”
- Source: Traktorenlexikon, “Someca 940”
SOMECA 940 (TD) sources
Source
- Source: Traktorenlexikon, “Someca 940”