Fiat 940 (DT) vs Renault 921-4

12 material differences

Tractor one

1978–1979

No measured PTO figure

Tractor two

1977–1980

No measured PTO figure

Which should you choose?

Read our verdict on the 940 (DT) and the 921-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 940 (DT) and Renault 921-4, field by field
Field	940 (DT)	921-4	Gap
Engine
Engine power, claimed claimed	90.8 hp	90.8 hp	—
Engine declared	O.M.-FIAT CO 3/80	MWM D 227-6	differs
Displacement declared	4.94 L	5.66 L	+15% 921-4
Maximum torque declared	—	249 lb·ft · 337 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Clutch declared	Dry FEREDO double clutch	Dry LuK double clutch type 310/310 G	differs
Hydraulics & hitch
Pump flow declared	10.0 gpm · 38.0 L/min	8.6 gpm · 32.6 L/min	+17% 940 (DT)
Pressure declared	2,901 psi · 200 bar	2,321 psi · 160 bar	+25% 940 (DT)
Three-point lift at ends declared	8,378 lb · 3,800 kg	10,119 lb · 4,590 kg	+21% 921-4
Rear PTO speeds declared	—	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,708 lb · 3,950 kg	10,847 lb · 4,920 kg	+25% 921-4
Maximum permissible mass declared	—	17,637 lb · 8,000 kg	—
Wheelbase declared	93.3 in · 2,370 mm	105.6 in · 2,683 mm	+13% 921-4
Length declared	159.4 in · 4,050 mm	174.9 in · 4,442 mm	+10% 921-4
Width declared	76.2 in · 1,935 mm	77.2 in · 1,960 mm	—
Height declared	105.1 in · 2,670 mm	108.9 in · 2,765 mm	—
Ground clearance declared	22.4 in · 570 mm	16.9 in · 430 mm	+33% 940 (DT)
Turning radius, braked declared	12.6 ft · 3.84 m	15.6 ft · 4.75 m	+24% 921-4
Fuel tank declared	95.1 qt · 90.0 L	216.6 qt · 205.0 L	+128% 921-4

Source

Source