Fiat 940 (DT) vs Ford 7700 (A)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 940 (DT) and the 7700 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 940 (DT) | 7700 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 90.8 hp | 90.8 hp | — |
| Engine declared | O.M.-FIAT CO 3/80 | Ford 256 DF or 268 DF | differs |
| Displacement declared | 4.94 L | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 7700 (A) |
| Clutch declared | Dry FEREDO double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.0 gpm · 38.0 L/min | 10.8 gpm · 41.0 L/min | +8% 7700 (A) |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Three-point lift at ends declared | 8,378 lb · 3,800 kg | 5,886 lb · 2,670 kg | +42% 940 (DT) |
| Rear PTO speeds declared | — | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,708 lb · 3,950 kg | 8,305 lb · 3,767 kg | — |
| Wheelbase declared | 93.3 in · 2,370 mm | 101.6 in · 2,581 mm | +9% 7700 (A) |
| Length declared | 159.4 in · 4,050 mm | 160.2 in · 4,069 mm | — |
| Width declared | 76.2 in · 1,935 mm | 64.0 in · 1,626 mm | +19% 940 (DT) |
| Height declared | 105.1 in · 2,670 mm | 114.4 in · 2,907 mm | +9% 7700 (A) |
| Ground clearance declared | 22.4 in · 570 mm | 21.7 in · 551 mm | — |
| Turning radius, braked declared | 12.6 ft · 3.84 m | 12.8 ft · 3.90 m | — |
| Fuel tank declared | 95.1 qt · 90.0 L | 188.1 qt · 178.0 L | +98% 7700 (A) |
Fiat 940 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 940/940 DT”
- Source: Traktorenlexikon, “Someca 940”
Ford 7700 (A) sources
Source
- Source: Traktorenlexikon, “Ford 7700”
- Source: Traktorenlexikon, “Ford 6700”