- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1978–1979
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Fiat 940 (DT) Hydraulics & PTO specifications
9 hydraulics and PTO values on record for the 940 (DT).
Engine power, claimed · gross or net not stated
90.8 hp
67.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 940/940 DT”, claimed
How much will a 940 (DT) lift?
A 940 (DT) lifts 8,378 lb (3,800 kg) at the lower-link ends.
| Pump flow | 10.0 gpm · 38.0 L/min |
|---|---|
| Steering pump flow | 5.2 gpm · 19.7 L/min |
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 8,378 lb · 3,800 kg |
| Hitch control | Lifting, lowering, floating position and draft and position control |
Source · Traktorenlexikon, “Fiat 940/940 DT”
What PTO does a 940 (DT) have?
PTO specifications for the 940 (DT) are below.
| Rear PTO speeds, optional | 540/1000 rpm |
|---|---|
| Engine speed at 540 PTO | 2,093 rpm |
Source · Traktorenlexikon, “Fiat 940/940 DT”
Where this page comes from
9 hydraulics and PTO values from Traktorenlexikon, “Fiat 940/940 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 940/940 DT — CC BY-SA 4.0, WIKIBOOKS-TL-121866 · revision 1075191. Wikibooks contributors (Traktorenlexikon). Original document