• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: High-power
  • Lab tested ×1
  • from 2006

WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Fendt 933 Vario Full specifications

Deutz TCD 2013L06 4V. The manufacturer claimed 295 horsepower. The only laboratory test on record is of one version: OECD Test 2543 measured 310.3 hp at the PTO of the 933 Vario TMS, COM IIIa.

Engine power, claimed · gross or net not stated

295 hp

220 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fendt 933 Vario”, claimed

Weight
22,619 lb
Top speed
31.1–37.3 mph

Fendt 933 Vario specs: key facts

  • The Fendt 933 Vario was first built in 2006.

  • Only one version of the Fendt 933 Vario has a laboratory test on record: the 933 Vario TMS, COM IIIa produced 231.4 kW (310.3 hp) at the PTO, measured on OECD Test 2543.Source 1

  • The Fendt 933 Vario has a claimed engine power (gross or net not stated) of 220 kW (295 hp); it has no measured PTO figure.

  • The Fendt 933 Vario is four-wheel drive (4WD).Source 1

  • The Fendt 933 Vario weighs 10,260 kg (22,619 lb) unladen.

  • The Fendt 933 Vario has a rear PTO running at 540/1000 rpm.Source 1

Source · Traktorenlexikon, “Fendt 933 Vario”

Fendt 933 Vario tractor
Photo: Alexandre Prevot from Nancy, France, CC BY-SA 4.0 via Wikimedia Commons · Wrong photo?

How much horsepower does a 933 Vario have?

The only laboratory test on record is of one version. OECD Test 2543 measured 310.3 hp at the PTO of the 933 Vario TMS, COM IIIa. For the 933 Vario as a whole the figure is the 295 hp claimed for the engine, which is not power at the shaft.

Engine, claimed (gross/net not stated)
295 hp

Sources · Traktorenlexikon, “Fendt 933 Vario”; OECD test report 2543, 2010

How much will a 933 Vario lift?

Hydraulic and PTO specifications for the 933 Vario are below.

Hydraulics & PTO — 933 Vario hydraulics and PTO specifications
Rear PTOengine-drivenSource 2Engages under load
PTO shaft44.45 mm, 6 splinesOn record for 1 of 2 configurations

Source · OECD test report 2543, 2010

What transmission does a 933 Vario have?

Transmission specifications for the 933 Vario are below.

Transmission — 933 Vario transmission specifications
SteeringHydrostatic steering with reaction steering system
Top speed31.1–37.3 mph · 50–60 km/hthe article lists alternatives

Source · Traktorenlexikon, “Fendt 933 Vario”

How much does a 933 Vario weigh?

A 933 Vario weighs 22,619 lb (10,260 kg) unladen.

Weights & dimensions — 933 Vario weights and dimensions
Unladen weight22,619 lb · 10,260 kg
Maximum permissible mass39,683 lb · 18,000 kg
Wheelbase120.1 in · 3,050 mm
Length222.6 in · 5,655 mm
Width108.3 in · 2,750 mm
Height130.8 in · 3,322 mm
Ground clearance22.4 in · 570 mm
Front track78.7 in · 2,000 mm
Rear track82.7 in · 2,100 mm

Source · Traktorenlexikon, “Fendt 933 Vario”

Which tractors compare with a 933 Vario?

Within 10% of its 295 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 933 Vario two-wheel drive or four-wheel drive?

The Fendt 933 Vario is four-wheel drive (4WD).

Where this page comes from

Compiled from OECD tractor test report 2543; and Traktorenlexikon, “Fendt 933 Vario”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/2 543: Fendt 933 Vario TMS, COM IIIa — Licence not stated by the publisher; facts cited, OECD-2543 · published 2010-03-03 · retrieved 2026-09-14. OECD; testing station DLG e.V., Gross-Umstadt, Germany. Original document
  2. Traktorenlexikon: Fendt 933 VarioCC BY-SA 4.0, WIKIBOOKS-TL-69815 · revision 1071896. Wikibooks contributors (Traktorenlexikon). Original document