Fendt 933 Vario vs New Holland T 8040
4 material differences · fewer than 12
Which should you choose?
Read our verdict on the 933 Vario and the T 8040 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 933 Vario | T 8040 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 295 hp | 303.7 hp | — |
| Engine declared | — | CUMMINS 6 TAA-8304 (TIER-III) | — |
| Displacement declared | — | 8.27 L | — |
| Maximum torque declared | 966 lb·ft · 1,310 N·m | 965 lb·ft · 1,309 N·m | — |
| Transmission | |||
| Top speed declared | 31.1–37.3 mph · 50–60 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | Electro-hydraulically operated wet multi-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 44.0 gpm · 166.6 L/min | — |
| Pressure declared | — | 3,336 psi · 230 bar | — |
| Three-point lift at ends declared | — | 22,494 lb · 10,203 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 22,619 lb · 10,260 kg | 21,839 lb · 9,906 kg | — |
| Maximum permissible mass declared | 39,683 lb · 18,000 kg | 30,865 lb · 14,000 kg | +29% 933 Vario |
| Wheelbase declared | 120.1 in · 3,050 mm | 121.2 in · 3,078 mm | — |
| Length declared | 222.6 in · 5,655 mm | 229.5 in · 5,829 mm | — |
| Width declared | 108.3 in · 2,750 mm | 98.0 in · 2,490 mm | +10% 933 Vario |
| Height declared | 130.8 in · 3,322 mm | 131.1 in · 3,331 mm | — |
| Ground clearance declared | 22.4 in · 570 mm | 14.6 in · 372 mm | +53% 933 Vario |
| Fuel tank declared | — | 720.7 qt · 682.0 L | — |
Fendt 933 Vario sources
Source
- Source: Traktorenlexikon, “Fendt 933 Vario”
- Source: OECD test report 2543, 2010
New Holland T 8040 sources
Source
- Source: Traktorenlexikon, “New Holland T8040”