• Rigid chassis
  • WhichTractor size: High-power
  • No lab test on file
  • 2004–2008

It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 8480 specs: hp, weight, years

SISU-Power 84.329 ETA six-cylinder diesel. The manufacturer claimed 286.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

286.2 hp

213.4 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 8480”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
21,440 lb
3-point lift
23,605 lb
Hyd. flow
37.0 gpm
Top speed
24.9–31.1 mph

Massey Ferguson 8480 specs: key facts

  • The Massey Ferguson 8480 was built from 2004 to 2008.

  • The Massey Ferguson 8480 has a claimed engine power (gross or net not stated) of 213.4 kW (286.2 hp); it has no measured PTO figure.

  • The Massey Ferguson 8480 is four-wheel drive (4WD).

  • The Massey Ferguson 8480 has a SISU-Power 84.329 ETA engine, a 6-cylinder 8.42 L diesel unit.Source 1

  • The Massey Ferguson 8480 weighs 9,725 kg (21,440 lb) unladen.

  • The Massey Ferguson 8480 has a rear PTO running at 540/1000/540E rpm.

  • The three-point hitch of the Massey Ferguson 8480 lifts 10,707 kg (23,605 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson 8480 delivers 140.2 L/min (37.0 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 8480”

How does the 8480 compare with its class?

  • Limitation:

    The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 46 tractors within 10% of its power, 30% carry one.

Derived by WhichTractor from 46 comparable records. How we work this out

Illustration of the 2004–2008 Massey Ferguson MF 8480, a 286 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does an 8480 have?

The only figure for the 8480 is 286.2 hp (213.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
286.2 hp

Source · Traktorenlexikon, “Massey Ferguson MF 8480”

What engine is in an 8480?

An 8480 has a SISU-Power 84.329 ETA, a 6-cylinder 8.42 L diesel engine.

Engine — 8480 engine specifications
Make & modelSISU-Power 84.329 ETASource 1
Cylinders6, liquid-cooledSource 1
Displacement513.8 ci · 8.42 LSource 1
Max torque798 lb·ft · 1,082 N·m @ 1,400 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 8480”

How much will an 8480 lift, and what is its hydraulic flow?

An 8480 lifts 23,605 lb (10,707 kg) at the lower-link ends.

Hydraulics & PTO — 8480 hydraulics and PTO specifications
SystemLoad sensing
Pump flow37.0 gpm · 140.2 L/min
Pressure2,176 psi · 150 bar
Lift at ends23,605 lb · 10,707 kg
Rear PTO540/1000/540E rpm

Source · Traktorenlexikon, “Massey Ferguson MF 8480”

What transmission does an 8480 have?

Transmission specifications for the 8480 are below.

Transmission — 8480 transmission specifications
BrakesHydraulically operated wet disc brake with brake booster
SteeringHydrostatic Danfoss steering
Top speed24.9–31.1 mph · 40–50 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 8480”

How much does an 8480 weigh?

An 8480 weighs 21,440 lb (9,725 kg) unladen.

Weights & dimensions — 8480 weights and dimensions
Unladen weight21,440 lb · 9,725 kg
Maximum permissible mass30,865 lb · 14,000 kg
Wheelbase121.1 in · 3,075 mm
Length209.4 in · 5,320 mm
Width100.4 in · 2,550 mm
Height125.2 in · 3,180 mm
Ground clearance19.7 in · 500 mm
Front track66.6–83.3 in · 1,692–2,116 mm
Rear track66.9–91.6 in · 1,699–2,326 mm

Source · Traktorenlexikon, “Massey Ferguson MF 8480”

What oil does an 8480 take, and how much?

An 8480 engine takes 21.9 qt (20.7 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

8480 fluid capacities, grades and service intervals
SystemCapacity
Engine oil21.9 qt · 20.7 LSource: Traktorenlexikon, “Massey Ferguson MF 8480” · single source, not independently verified
Transmission89.8 qt · 85.0 LSource: Traktorenlexikon, “Massey Ferguson MF 8480” · single source, not independently verified
Hydraulic105.7 qt · 100.0 LSource: Traktorenlexikon, “Massey Ferguson MF 8480” · single source, not independently verified
Front axle6.3 qt · 6.0 LSource: Traktorenlexikon, “Massey Ferguson MF 8480” · single source, not independently verified
Cooling system35.9 qt · 34.0 LSource: Traktorenlexikon, “Massey Ferguson MF 8480” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an 8480?

Within 10% of its 286.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 8480

Is an 8480 two-wheel drive or four-wheel drive?

The Massey Ferguson 8480 is four-wheel drive (4WD).

What PTO does an 8480 have?

An 8480 has a 540/1000/540E rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 8470”; and Traktorenlexikon, “Massey Ferguson MF 8480”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 8470 — CC BY-SA 4.0, WIKIBOOKS-TL-87745 · revision 992278. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 8480 — CC BY-SA 4.0, WIKIBOOKS-TL-87774 · revision 992279. Wikibooks contributors (Traktorenlexikon). Original document