7 material differences · fewer than 12
Tractor oneClaas Xerion 33002004–2013No measured PTO figureTractor twoFendt 933 Variofrom 2006No measured PTO figure
Which should you choose?
Read our verdict on the Xerion 3300 and the 933 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Xerion 3300 | 933 Vario | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 300 hp | 295 hp | — |
| Maximum torque declared | 1,106 lb·ft · 1,500 N·m | 966 lb·ft · 1,310 N·m | +15% Xerion 3300 |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 31.1–37.3 mph · 50–60 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 22,487 lb · 10,200 kg | 22,619 lb · 10,260 kg | — |
| Maximum permissible mass declared | — | 39,683 lb · 18,000 kg | — |
| Wheelbase declared | 129.9 in · 3,300 mm | 120.1 in · 3,050 mm | +8% Xerion 3300 |
| Length declared | 261.0 in · 6,630 mm | 222.6 in · 5,655 mm | +17% Xerion 3300 |
| Width declared | 98.0 in · 2,490 mm | 108.3 in · 2,750 mm | +10% 933 Vario |
| Ground clearance declared | 18.5–22.4 in · 470–570 mm | 22.4 in · 570 mm | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Claas Xerion 3300 sources
- Source: Traktorenlexikon, “Claas Xerion 3300”
Fendt 933 Vario sources
- Source: Traktorenlexikon, “Fendt 933 Vario”
- Source: OECD test report 2543, 2010