Fahr D 25 NH vs Güldner A 3 KTA (Burgund-T)

12 material differences

Tractor one

1953

No measured PTO figure

Tractor two

1962–1965

No measured PTO figure

Which should you choose?

Read our verdict on the D 25 NH and the A 3 KTA (Burgund-T) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Fahr D 25 NH and Güldner A 3 KTA (Burgund-T), field by field
Field	D 25 NH	A 3 KTA (Burgund-T)	Gap
Engine
Engine power, claimed claimed	24.7 hp	24.5 hp	—
Engine declared	KHD F2M 414	Güldner 3 LKA	differs
Displacement declared	2.20 L	1.32 L	+67% D 25 NH
Maximum torque declared	88 lb·ft · 120 N·m	59 lb·ft · 79 N·m	+52% D 25 NH
Transmission
Top speed declared	12.2 mph · 19.7 km/h	12.2 mph · 19.7 km/h	—
Clutch declared	—	Pedal operated dry double clutch by Fichtel & Sachs	—
Hydraulics & hitch
Pressure declared	3,129 psi · 216 bar	2,134 psi · 147 bar	+47% D 25 NH
Three-point lift at ends declared	—	1,984 lb · 900 kg	—
Rear PTO speeds declared	540 rpm	546 rpm	differs
Weight & dimensions
Unladen weight declared	4,299 lb · 1,950 kg	3,197 lb · 1,450 kg	+34% D 25 NH
Maximum permissible mass declared	7,937 lb · 3,600 kg	—	—
Wheelbase declared	73.1 in · 1,856 mm	78.7 in · 2,000 mm	+8% A 3 KTA (Burgund-T)
Length declared	120.9 in · 3,070 mm	133.1 in · 3,380 mm	+10% A 3 KTA (Burgund-T)
Width declared	63.8 in · 1,620 mm	59.8 in · 1,520 mm	+7% D 25 NH
Height declared	67.7 in · 1,720 mm	61.8 in · 1,570 mm	+10% D 25 NH
Ground clearance declared	17.5 in · 445 mm	—	—
Turning radius, braked declared	11.0 ft · 3.35 m	9.2 ft · 2.80 m	+20% D 25 NH
Fuel tank declared	54.9 qt · 52 L	33.8 qt · 32 L	+63% D 25 NH

Source

Source