Deutz-Fahr Agroplus 75 vs Deutz-Fahr Agrotron 80 MK3

7 material differences · fewer than 12

Tractor one

1997–2005

No measured PTO figure

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the Agroplus 75 and the Agrotron 80 MK3 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agroplus 75 and Deutz-Fahr Agrotron 80 MK3, field by field
Field	Agroplus 75	Agrotron 80 MK3	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	—	Deutz BF 4 M 1012 E	—
Displacement declared	—	3.19 L	—
Maximum torque declared	218 lb·ft · 295 N·m	218 lb·ft · 296 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Hydraulically operated wet ZF multi-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	21.9 gpm · 83.0 L/min	—
Three-point lift at ends declared	7,937 lb · 3,600 kg	13,713 lb · 6,220 kg	+73% Agrotron 80 MK3
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,562 lb · 3,430 kg	8,752 lb · 3,970 kg	+16% Agrotron 80 MK3
Maximum permissible mass declared	13,669 lb · 6,200 kg	14,330 lb · 6,500 kg	—
Wheelbase declared	93.7 in · 2,380 mm	95.2 in · 2,419 mm	—
Length declared	145.7 in · 3,700 mm	157.7 in · 4,005 mm	+8% Agrotron 80 MK3
Width declared	81.1 in · 2,060 mm	81.1 in · 2,060 mm	—
Height declared	103.3 in · 2,624 mm	107.1 in · 2,720 mm	—
Ground clearance declared	15.4–19.8 in · 392–502 mm	18.7 in · 475 mm	differs
Fuel tank declared	147.9 qt · 140 L	190.2 qt · 180 L	+29% Agrotron 80 MK3

Source

Source