- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1990–1993
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Deutz-Fahr DX 4.61 Full specifications
KHD BF4L 913 four-cylinder diesel. The manufacturer claimed 87 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
87 hp
65 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.61”, claimed
- Weight
- 9,149 lb
- 3-point lift
- 8,378 lb
- Top speed
- 18.6–24.9 mph
Deutz-Fahr DX 4.61 specs: key facts
The Deutz-Fahr DX 4.61 was built from 1990 to 1993.
The Deutz-Fahr DX 4.61 has a claimed engine power (gross or net not stated) of 65 kW (87 hp); it has no measured PTO figure.
The Deutz-Fahr DX 4.61 is four-wheel drive (4WD).
The Deutz-Fahr DX 4.61 has a KHD BF4L 913 engine, a 4-cylinder 4.09 L diesel unit.Source 2
The Deutz-Fahr DX 4.61 weighs 4,150 kg (9,149 lb) unladen.
The Deutz-Fahr DX 4.61 has an independent rear PTO running at 540/1000/750 rpm.
The three-point hitch of the Deutz-Fahr DX 4.61 lifts 3,800 kg (8,378 lb) at the lower-link ends.
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.61”
How much horsepower does a DX 4.61 have?
The only figure for the DX 4.61 is 87 hp (65 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.61”
What engine is in a DX 4.61?
A DX 4.61 has a KHD BF4L 913, a 4-cylinder 4.09 L diesel engine.
| Make & model | KHD BF4L 913Source 2 |
|---|---|
| Cylinders | 4, air-cooledSource 2 |
| Displacement | 249.3 ci · 4.09 LSource 2 |
| Max torque | 251 lb·ft · 340 N·m @ 1,600 rpm |
| Injection | direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.61”
How much will a DX 4.61 lift?
A DX 4.61 lifts 8,378 lb (3,800 kg) at the lower-link ends of its Category 2 three-point hitch.
| Hitch category | Category 2 |
|---|---|
| Lift at ends | 8,378 lb · 3,800 kg |
| Rear PTO | Independent, 540/1000/750 rpm @ 2,121 engine rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.61”
What transmission does a DX 4.61 have?
Transmission specifications for the DX 4.61 are below.
| Clutch | dry single clutch |
|---|---|
| Steering | hydrostatic ZF steering |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.61”
How much does a DX 4.61 weigh?
A DX 4.61 weighs 9,149 lb (4,150 kg) unladen.
| Unladen weight | 9,149 lb · 4,150 kg |
|---|---|
| Maximum permissible mass | 16,535 lb · 7,500 kg |
| Maximum front axle load | 6,614 lb · 3,000 kg |
| Maximum rear axle load | 14,330 lb · 6,500 kg |
| Wheelbase | 96.5 in · 2,450 mm |
| Length | 168.2 in · 4,272 mm |
| Width | 90.2 in · 2,290 mm |
| Height | 108.7 in · 2,762 mm |
| Ground clearance | 18.3 in · 465 mm |
| Front track | 63.0–70.9 in · 1,600–1,800 mmthe article lists alternatives |
| Rear track | 59.1–70.9 in · 1,500–1,800 mmthe article lists alternatives |
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.61”
Which tractors compare with a DX 4.61?
Within 10% of its 87 hp of claimed engine power, the same type, and first built within 15 years of it.
- Massey Ferguson MF 69887 hp engine, claimed · 1982–1984Side by side with the DX 4.61 →
- Deutz-Fahr Agrotron 4.9086.9 hp engine, claimed · 1995–1997Side by side with the DX 4.61 →
- Deutz-Fahr Agrotron 9086.9 hp engine, claimed · 1997–2001Side by side with the DX 4.61 →
- Deutz-Fahr Agrocompact 90 V/F86.9 hp engine, claimed · 1998–2004Side by side with the DX 4.61 →
- Massey Ferguson MF 100486.9 hp engine, claimed · 1978–1990Side by side with the DX 4.61 →
- SAME Explorer 90 II (DT)86.8 hp engine, claimed · 1989–1998Side by side with the DX 4.61 →
Everything else people ask
Is a DX 4.61 two-wheel drive or four-wheel drive?
The Deutz-Fahr DX 4.61 is four-wheel drive (4WD).
What PTO does a DX 4.61 have?
A DX 4.61 has a independent 540/1000/750 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”; and Traktorenlexikon, “Deutz-Fahr AgroStar 4.61”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr AgroStar 4.61 — CC BY-SA 4.0, WIKIBOOKS-TL-87881 · revision 1081582. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Deutz-Fahr AgroStar 4.78 — CC BY-SA 4.0, WIKIBOOKS-TL-79387 · revision 1007751. Wikibooks contributors (Traktorenlexikon). Original document