12 material differences

Tractor oneDeutz-Fahr DX 4.611990–1993No measured PTO figureTractor twoHürlimann XN-7091999–2003No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.61 and the XN-709 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.61 and Hürlimann XN-709, field by field
Field	DX 4.61	XN-709	Gap
Engine
Engine power, claimed claimed	87 hp	86.9 hp	—
Engine declared	KHD BF4L 913	Hürlimann 1000.4 WT-1	differs
Displacement declared	4.09 L	4.00 L	—
Maximum torque declared	251 lb·ft · 340 N·m	235 lb·ft · 319 N·m	+7% DX 4.61
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	dry single clutch	pedal-operated dry SDF single-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	9.2 gpm · 34.9 L/min	—
Pressure declared	—	3,046 psi · 210 bar	—
Rear PTO speeds declared	540/1000/750 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	6,041 lb · 2,740 kg	+51% DX 4.61
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	96.5 in · 2,450 mm	80.9 in · 2,056 mm	+19% DX 4.61
Length declared	168.2 in · 4,272 mm	140.2 in · 3,561 mm	+20% DX 4.61
Width declared	90.2 in · 2,290 mm	50.8–64.6 in · 1,290–1,640 mm	differs
Height, over the cab declared	108.7 in · 2,762 mm	83.1 in · 2,110 mm	+31% DX 4.61
Ground clearance declared	18.3 in · 465 mm	10.6 in · 270 mm	+72% DX 4.61
Turning radius, braked declared	—	13.9 ft · 4.23 m	—
Fuel tank declared	139.5 qt · 132 L	61.3 qt · 58.0 L	+128% DX 4.61

Source

Source