Deutz-Fahr DX 4.61 vs Massey Ferguson MF 698
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the DX 4.61 and the MF 698 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | DX 4.61 | MF 698 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 87 hp | 87 hp | — |
| Engine declared | KHD BF4L 913 | Perkins A 4.318.2 | differs |
| Displacement declared | 4.09 L | 5.21 L | +28% MF 698 |
| Maximum torque declared | 251 lb·ft · 340 N·m | 261 lb·ft · 354 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.1 mph · 29.1 km/h | differs |
| Clutch declared | dry single clutch | dry disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Three-point lift at ends declared | 8,378 lb · 3,800 kg | — | — |
| Rear PTO speeds declared | 540/1000/750 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,149 lb · 4,150 kg | 7,716 lb · 3,500 kg | +19% DX 4.61 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | — | — |
| Wheelbase declared | 96.5 in · 2,450 mm | 95.7 in · 2,430 mm | — |
| Length declared | 168.2 in · 4,272 mm | 160.6 in · 4,080 mm | — |
| Width declared | 90.2 in · 2,290 mm | — | — |
| Height declared | 108.7 in · 2,762 mm | 107.5 in · 2,730 mm | — |
| Ground clearance declared | 18.3 in · 465 mm | — | — |
| Fuel tank declared | 139.5 qt · 132 L | — | — |
Deutz-Fahr DX 4.61 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 4.61”
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”
Massey Ferguson MF 698 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 698”