CASE-INTERNATIONAL 995 (DT) vs Hürlimann H-488 T "Prestige"

8 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1989–1998

No measured PTO figure

Which should you choose?

Read our verdict on the 995 (DT) and the H-488 T "Prestige" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 995 (DT) and Hürlimann H-488 T "Prestige", field by field
Field	995 (DT)	H-488 T "Prestige"	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	IHC D-268	Hürlimann H-1000.4 WT	differs
Displacement declared	4.39 L	4.00 L	+10% 995 (DT)
Maximum torque declared	221 lb·ft · 299 N·m	225 lb·ft · 305 N·m	—
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6 mph · 30 km/h	+17% 995 (DT)
Clutch declared	Pedal-operated dry Rockford single-disc clutch	—	—
Hydraulics & hitch
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	6,349 lb · 2,880 kg	+19% H-488 T "Prestige"
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,535 lb · 2,964 kg	7,485 lb · 3,395 kg	+15% H-488 T "Prestige"
Wheelbase declared	88.0 in · 2,235 mm	91.3 in · 2,320 mm	—
Length declared	151.4 in · 3,845 mm	159.4 in · 4,050 mm	+5% H-488 T "Prestige"
Width declared	73.0 in · 1,854 mm	79.5 in · 2,020 mm	+9% H-488 T "Prestige"
Height declared	105.1 in · 2,670 mm	102.4 in · 2,600 mm	—
Ground clearance declared	22.0 in · 559 mm	16.1 in · 410 mm	+36% 995 (DT)
Turning radius, braked declared	—	11.8 ft · 3.60 m	—
Fuel tank declared	118.3 qt · 112.0 L	116.2 qt · 110.0 L	—

Source

Source