6 material differences · fewer than 12
Tractor oneCase-IH 4240 (PRO)1993–1998No measured PTO figureTractor twoCASE-INTERNATIONAL 995 (DT)1990–1993No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their power is identical, with the same weight or the same engine, which usually means one machine sold under two names; any difference below comes from how each source describes it. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
6 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 4240 (PRO) | 995 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 88.8 hp | 88.8 hp | — |
| Engine declared | IHC D-268 or D-268/68 | IHC D-268 | differs |
| Displacement declared | 4.39 L | 4.39 L | — |
| Maximum torque declared | 232 lb·ft · 315 N·m | 221 lb·ft · 299 N·m | +5% 4240 (PRO) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 21.7 mph · 35 km/h | +17% 995 (DT) |
| Clutch declared | Pedal-operated dry single-plate clutch | Pedal-operated dry Rockford single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pressure declared | — | 2,698 psi · 186 bar | — |
| Three-point lift, at the coupling points declared | 7,374 lb · 3,345 kg | 5,351 lb · 2,427 kg | +38% 4240 (PRO) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,691 lb · 3,035 kg | 6,535 lb · 2,964 kg | — |
| Maximum permissible mass declared | 12,125 lb · 5,500 kg | — | — |
| Wheelbase declared | 88.0 in · 2,235 mm | 88.0 in · 2,235 mm | — |
| Length declared | 148.0 in · 3,759 mm | 151.4 in · 3,845 mm | — |
| Width declared | 73.0–92.7 in · 1,854–2,354 mm | 73.0–92.7 in · 1,854–2,354 mm | — |
| Height, over the cab declared | 105.0 in · 2,666 mm | 105.1 in · 2,670 mm | — |
| Ground clearance declared | 20.3 in · 515 mm | 22.0 in · 559 mm | +9% 995 (DT) |
| Fuel tank declared | 118.3 qt · 112.0 L | 118.3 qt · 112.0 L | — |
Case-IH 4240 (PRO) sources
Source
- Source: Traktorenlexikon, “Case-IH 4240”
CASE-INTERNATIONAL 995 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 995”
- Source: Traktorenlexikon, “Case-IH 4230”