WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1990–1993

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

CASE-INTERNATIONAL 595 (DT) specs: hp, weight, years

IHC D-206 four-cylinder diesel. The manufacturer claimed 59.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

59.1 hp

44.1 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case-IH 595”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,440 lb
3-point lift
4,409 lb
Top speed
18.6 mph

CASE-INTERNATIONAL 595 (DT) specs: key facts

  • The CASE-INTERNATIONAL 595 (DT) was built from 1990 to 1993.

  • The CASE-INTERNATIONAL 595 (DT) has a claimed engine power (gross or net not stated) of 44.1 kW (59.1 hp); it has no measured PTO figure.

  • The CASE-INTERNATIONAL 595 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The CASE-INTERNATIONAL 595 (DT) has a IHC D-206 engine, a 4-cylinder 3.38 L diesel unit.Source 1

  • The CASE-INTERNATIONAL 595 (DT) weighs 2,921 kg (6,440 lb) unladen.

  • The CASE-INTERNATIONAL 595 (DT) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the CASE-INTERNATIONAL 595 (DT) lifts 2,000 kg (4,409 lb) at the lower-link ends.

Source · Traktorenlexikon, “Case-IH 595”

Illustration of the 1990–1993 CASE-INTERNATIONAL 595 (DT), a 59 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 595 (DT) have?

The only figure for the 595 (DT) is 59.1 hp (44.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
59.1 hp

Source · Traktorenlexikon, “Case-IH 595”

What engine is in a 595 (DT)?

A 595 (DT) has an IHC D-206, a 4-cylinder 3.38 L diesel engine.

Engine — 595 (DT) engine specifications
Make & modelIHC D-206Source 1
Cylinders4, liquid-cooledSource 1
Displacement206.4 ci · 3.38 LSource 1
Max torque162 lb·ft · 220 N·m @ 1,400 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “Case-IH 595”

How much will a 595 (DT) lift?

A 595 (DT) lifts 4,409 lb (2,000 kg) at the lower-link ends.

Hydraulics & PTO — 595 (DT) hydraulics and PTO specifications
Lift at ends4,409 lb · 2,000 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,920 engine rpmEngages under load

Source · Traktorenlexikon, “Case-IH 595”

What transmission does a 595 (DT) have?

Transmission specifications for the 595 (DT) are below.

Transmission — 595 (DT) transmission specifications
ClutchPedal-operated dry Laycock single-disc clutch
BrakesPedal-operated wet disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering type OSPC 100 OR with double-acting ZF steering cylinder
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Case-IH 595”

How much does a 595 (DT) weigh?

A 595 (DT) weighs 6,440 lb (2,921 kg) unladen.

Weights & dimensions — 595 (DT) weights and dimensions
Unladen weight6,440 lb · 2,921 kgDT: 3,395
Wheelbase84.5 in · 2,146 mmDT: 2,226
Length142.0 in · 3,607 mm
Width75.0 in · 1,905 mm
Height96.5 in · 2,451 mm
Ground clearance22.1 in · 561 mmDT: 368
Front track52.0–72.1 in · 1,321–1,831 mmDT: 1,365-1,825
Rear track52.2–75.8 in · 1,325–1,925 mm
Turning radius, braked11.7 ft · 3.56 mDT: 4,115

Source · Traktorenlexikon, “Case-IH 595”

What oil does a 595 (DT) take, and how much?

A 595 (DT) engine takes 10.0 qt (9.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

595 (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.0 qt · 9.5 LSource: Traktorenlexikon, “Case-IH 595” · single source, not independently verified
Transmission36.0 qt · 34.1 LSource: Traktorenlexikon, “Case-IH 595” · single source, not independently verified
Front axle4.8 qt · 4.5 LSource: Traktorenlexikon, “Case-IH 595” · single source, not independently verified
Cooling system14.5 qt · 13.7 LSource: Traktorenlexikon, “Case-IH 595” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 595 (DT)?

Within 10% of its 59.1 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the CASE-INTERNATIONAL 595 (DT)

Is a 595 (DT) two-wheel drive or four-wheel drive?

The CASE-INTERNATIONAL 595 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 595 (DT) have?

A 595 (DT) has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Case-IH 595”; and Traktorenlexikon, “Case-IH 3230”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case-IH 3230 — CC BY-SA 4.0, WIKIBOOKS-TL-27258 · revision 975440. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Case-IH 595 — CC BY-SA 4.0, WIKIBOOKS-TL-115476 · revision 1070431. Wikibooks contributors (Traktorenlexikon). Original document