- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1990–1993
WhichTractor size, not the maker’s category
CASE-INTERNATIONAL 595 (DT) Hydraulics & PTO specifications
9 hydraulics and PTO values on record for the 595 (DT).
Engine power, claimed · gross or net not stated
59.1 hp
44.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 595”, claimed
How much will a 595 (DT) lift?
A 595 (DT) lifts 4,409 lb (2,000 kg) at the lower-link ends.
| Steering pump flow | 2.5 gpm · 9.5 L/min |
|---|---|
| Rear remote valves | 3 |
| Lift capacity at ball ends | 4,409 lb · 2,000 kg |
Source · Traktorenlexikon, “Case-IH 595”
What PTO does a 595 (DT) have?
A 595 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,920 rpm |
| PTO power, claimed | 52.0 hp · 38.8 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Case-IH 595”
Where this page comes from
9 hydraulics and PTO values from Traktorenlexikon, “Case-IH 595”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 595 — CC BY-SA 4.0, WIKIBOOKS-TL-115476 · revision 1070431. Wikibooks contributors (Traktorenlexikon). Original document