• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1977–1980

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

AGRIFULL Tornado 80 (DT) specs: hp, weight, years

V.M.-MOTORI 1054 SU four-cylinder diesel. The manufacturer claimed 75.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

75.9 hp

56.6 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Agrifull Tornedo 80”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
7,046 lb
3-point lift
4,328 lb
Hyd. flow
7.9 gpm
Top speed
15.5 mph

AGRIFULL Tornado 80 (DT) specs: key facts

  • The AGRIFULL Tornado 80 (DT) was built from 1977 to 1980.

  • The AGRIFULL Tornado 80 (DT) has a claimed engine power (gross or net not stated) of 56.6 kW (75.9 hp); it has no measured PTO figure.

  • The AGRIFULL Tornado 80 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The AGRIFULL Tornado 80 (DT) has a V.M.-MOTORI 1054 SU engine, a 4-cylinder 3.81 L diesel unit.

  • The AGRIFULL Tornado 80 (DT) weighs 3,196 kg (7,046 lb) unladen.

  • The AGRIFULL Tornado 80 (DT) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the AGRIFULL Tornado 80 (DT) lifts 1,963 kg (4,328 lb) at the lower-link ends.

  • The hydraulic pump of the AGRIFULL Tornado 80 (DT) delivers 30.0 L/min (7.9 gpm).

Source · Traktorenlexikon, “Agrifull Tornedo 80”

How does the Tornado 80 (DT) compare with its class?

  • Limitation:

    A three-point lift at the lower links of 1,963 kg is low for its class — 32% below the median of 2,900 kg across the 316 machines within 10% of its power that hold this figure.

  • Limitation:

    A maximum engine torque of 186 N·m is low for its class — 31% below the median of 270 N·m across the 348 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 415 comparable records. How we work this out

Illustration of the 1977–1980 AGRIFULL Tornado 80 (DT), a 76 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a Tornado 80 (DT) have?

The only figure for the Tornado 80 (DT) is 75.9 hp (56.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
75.9 hp

Source · Traktorenlexikon, “Agrifull Tornedo 80”

What engine is in a Tornado 80 (DT)?

A Tornado 80 (DT) has a V.M.-MOTORI 1054 SU, a 4-cylinder 3.81 L diesel engine.

Engine — Tornado 80 (DT) engine specifications
Make & modelV.M.-MOTORI 1054 SU
Cylinders4, air-cooled
Displacement232.4 ci · 3.81 L
Max torque137 lb·ft · 186 N·m
Electrical system12 V

Source · Traktorenlexikon, “Agrifull Tornedo 80”

How much will a Tornado 80 (DT) lift, and what is its hydraulic flow?

A Tornado 80 (DT) lifts 4,328 lb (1,963 kg) at the lower-link ends.

Hydraulics & PTO — Tornado 80 (DT) hydraulics and PTO specifications
Pump flow7.9 gpm · 30.0 L/min
Pressure3,118 psi · 215 bar
Lift at ends4,328 lb · 1,963 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 2,016 engine rpmEngages under load

Source · Traktorenlexikon, “Agrifull Tornedo 80”

What transmission does a Tornado 80 (DT) have?

Transmission specifications for the Tornado 80 (DT) are below.

Transmission — Tornado 80 (DT) transmission specifications
SteeringHydrostatic steering with double-acting steering cylinder
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Agrifull Tornedo 80”

How much does a Tornado 80 (DT) weigh?

A Tornado 80 (DT) weighs 7,046 lb (3,196 kg) unladen.

Weights & dimensions — Tornado 80 (DT) weights and dimensions
Unladen weight7,046 lb · 3,196 kgDT: 3,420
Wheelbase98.4 in · 2,500 mm
Length164.6 in · 4,180 mm
Width80.7 in · 2,050 mm
Height106.7 in · 2,710 mm
Ground clearance16.1 in · 410 mmDT: 320
Front track63.0 in · 1,600 mm
Rear track47.2–78.7 in · 1,200–2,000 mm
Turning radius, braked11.8 ft · 3.60 mDT: 4,000

Source · Traktorenlexikon, “Agrifull Tornedo 80”

What oil does a Tornado 80 (DT) take, and how much?

A Tornado 80 (DT) engine takes 10.6 qt (10.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

Tornado 80 (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.6 qt · 10.0 LSource: Traktorenlexikon, “Agrifull Tornedo 80” · single source, not independently verified
Transmission & hydraulic50.5 qt · 47.8 LSource: Traktorenlexikon, “Agrifull Tornedo 80” · single source, not independently verified
Front axle1.7 qt · 1.6 LSource: Traktorenlexikon, “Agrifull Tornedo 80” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a Tornado 80 (DT)?

Within 10% of its 75.9 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the AGRIFULL Tornado 80 (DT)

Is a Tornado 80 (DT) two-wheel drive or four-wheel drive?

The AGRIFULL Tornado 80 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a Tornado 80 (DT) have?

A Tornado 80 (DT) has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Agrifull Tornedo 80”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Agrifull Tornedo 80 — CC BY-SA 4.0, WIKIBOOKS-TL-122077 · revision 1078866. Wikibooks contributors (Traktorenlexikon). Original document