7 material differences · fewer than 12
Tractor oneAGRIFULL Tornado 80 (DT)1977–1980No measured PTO figureTractor twoHürlimann 77001976–1978No measured PTO figure
Which should you choose?
Read our verdict on the Tornado 80 (DT) and the 7700 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Tornado 80 (DT) | 7700 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.9 hp | 75.9 hp | — |
| Engine declared | V.M.-MOTORI 1054 SU | Hürlimann D-310 | differs |
| Displacement declared | 3.81 L | 4.95 L | +30% 7700 |
| Maximum torque declared | 137 lb·ft · 186 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.9 gpm · 30.0 L/min | — | — |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,046 lb · 3,196 kg | 6,460 lb · 2,930 kg | +9% Tornado 80 (DT) |
| Wheelbase declared | 98.4 in · 2,500 mm | 93.7 in · 2,380 mm | — |
| Length declared | 164.6 in · 4,180 mm | 147.6 in · 3,750 mm | +11% Tornado 80 (DT) |
| Width declared | 80.7 in · 2,050 mm | 75.6 in · 1,920 mm | +7% Tornado 80 (DT) |
| Ground clearance declared | 16.1 in · 410 mm | — | — |
| Turning radius, braked declared | 11.8 ft · 3.60 m | — | — |
| Fuel tank declared | 153.2 qt · 145.0 L | 58.1 qt · 55.0 L | +164% Tornado 80 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL Tornado 80 (DT) sources
- Source: Traktorenlexikon, “Agrifull Tornedo 80”
Hürlimann 7700 sources
- Source: Traktorenlexikon, “Hürlimann 7700”