WhichTractor
  • Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1980–1986

It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

AGRIFULL 80-95 Turbo (DT) specs: hp, weight, years

V.M.-MOTTORI VM 1054 Turbo four-cylinder diesel. The manufacturer claimed 93.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

93.7 hp

69.9 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Agrifull 80-95”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
7,253 lb
Hyd. flow
7.9 gpm
Top speed
15.5 mph

AGRIFULL 80-95 Turbo (DT) specs: key facts

  • The AGRIFULL 80-95 Turbo (DT) was built from 1980 to 1986.

  • The AGRIFULL 80-95 Turbo (DT) has a claimed engine power (gross or net not stated) of 69.9 kW (93.7 hp); it has no measured PTO figure.

  • The AGRIFULL 80-95 Turbo (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The AGRIFULL 80-95 Turbo (DT) has a V.M.-MOTTORI VM 1054 Turbo engine, a 4-cylinder 3.81 L diesel unit.

  • The AGRIFULL 80-95 Turbo (DT) weighs 3,290 kg (7,253 lb) unladen.

  • The AGRIFULL 80-95 Turbo (DT) has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the AGRIFULL 80-95 Turbo (DT) delivers 30.0 L/min (7.9 gpm).

Source · Traktorenlexikon, “Agrifull 80-95”

How does the 80-95 Turbo (DT) compare with its class?

  • Limitation:

    A hydraulic pump flow of 30 L/min is low for its class — 42% below the median of 51.4 L/min across the 272 machines within 10% of its power that hold this figure.

  • Limitation:

    A 80 L fuel tank is low for its class — 38% below the median of 130 L across the 313 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 332 comparable records. How we work this out

Illustration of the 1980–1986 AGRIFULL 80-95 Turbo (DT), a 94 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does an 80-95 Turbo (DT) have?

The only figure for the 80-95 Turbo (DT) is 93.7 hp (69.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
93.7 hp

Source · Traktorenlexikon, “Agrifull 80-95”

What engine is in an 80-95 Turbo (DT)?

An 80-95 Turbo (DT) has a V.M.-MOTTORI VM 1054 Turbo, a 4-cylinder 3.81 L diesel engine.

Engine — 80-95 Turbo (DT) engine specifications
Make & modelV.M.-MOTTORI VM 1054 Turbo
Cylinders4, air-cooled
Displacement232.4 ci · 3.81 L
Electrical system12 V

Source · Traktorenlexikon, “Agrifull 80-95”

How much will an 80-95 Turbo (DT) lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 80-95 Turbo (DT) are below.

Hydraulics & PTO — 80-95 Turbo (DT) hydraulics and PTO specifications
Pump flow7.9 gpm · 30.0 L/min
Pressure3,118 psi · 215 bar
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 2,125 engine rpmEngages under load

Source · Traktorenlexikon, “Agrifull 80-95”

What transmission does an 80-95 Turbo (DT) have?

Transmission specifications for the 80-95 Turbo (DT) are below.

Transmission — 80-95 Turbo (DT) transmission specifications
ClutchDry VALEO or LuK double clutch
SteeringHydrostatic steering with double acting steering cylinder
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Agrifull 80-95”

How much does an 80-95 Turbo (DT) weigh?

An 80-95 Turbo (DT) weighs 7,253 lb (3,290 kg) unladen.

Weights & dimensions — 80-95 Turbo (DT) weights and dimensions
Unladen weight7,253 lb · 3,290 kgDT: 3,650
Wheelbase98.4 in · 2,500 mm
Length150.2 in · 3,815 mm
Width80.7–97.2 in · 2,050–2,470 mm
Height104.3 in · 2,650 mm
Ground clearance16.9 in · 430 mm
Front track55.9–79.5 in · 1,420–2,020 mmDT: 1,710-2,145
Rear track63.0–86.6 in · 1,600–2,200 mm

Source · Traktorenlexikon, “Agrifull 80-95”

What oil does an 80-95 Turbo (DT) take, and how much?

An 80-95 Turbo (DT) engine takes 8.5 qt (8.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

80-95 Turbo (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil8.5 qt · 8.0 LSource: Traktorenlexikon, “Agrifull 80-95” · single source, not independently verified
Transmission & hydraulic50.5 qt · 47.8 LSource: Traktorenlexikon, “Agrifull 80-95” · single source, not independently verified
Front axle1.7 qt · 1.6 LSource: Traktorenlexikon, “Agrifull 80-95” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an 80-95 Turbo (DT)?

Within 10% of its 93.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the AGRIFULL 80-95 Turbo (DT)

Is an 80-95 Turbo (DT) two-wheel drive or four-wheel drive?

The AGRIFULL 80-95 Turbo (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does an 80-95 Turbo (DT) have?

An 80-95 Turbo (DT) has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Agrifull 80-95”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Agrifull 80-95 — CC BY-SA 4.0, WIKIBOOKS-TL-122084 · revision 1078903. Wikibooks contributors (Traktorenlexikon). Original document