• Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1983–1989

It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 805/805-4 specs: hp, weight, years

VALMET TD 44 DS 8 four-cylinder diesel. The manufacturer claimed 93.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

93.7 hp

69.9 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet 805”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
7,804 lb
3-point lift
9,149 lb
Hyd. flow
13.5 gpm
Top speed
18.6 mph

VALMET 805/805-4 specs: key facts

  • The VALMET 805/805-4 was built from 1983 to 1989.

  • The VALMET 805/805-4 has a claimed engine power (gross or net not stated) of 69.9 kW (93.7 hp); it has no measured PTO figure.

  • The VALMET 805/805-4 was offered in two-wheel-drive and four-wheel-drive versions.

  • The VALMET 805/805-4 has a VALMET TD 44 DS 8 engine, a 4-cylinder 4.40 L diesel unit.

  • The VALMET 805/805-4 weighs 3,540 kg (7,804 lb) unladen.

  • The VALMET 805/805-4 has an independent rear PTO running at 540 rpm.

  • The three-point hitch of the VALMET 805/805-4 lifts 4,150 kg (9,149 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 805/805-4 delivers 51.2 L/min (13.5 gpm).

Source · Traktorenlexikon, “Valmet 805”

How does the 805/805-4 compare with its class?

  • Limitation:

    Eight forward gears is low for its class — 47% below the median of 15 across the 320 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 332 comparable records. How we work this out

Illustration of the 1983–1989 VALMET 805/805-4, a 94 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does an 805/805-4 have?

The only figure for the 805/805-4 is 93.7 hp (69.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
93.7 hp

Source · Traktorenlexikon, “Valmet 805”

What engine is in an 805/805-4?

An 805/805-4 has a VALMET TD 44 DS 8, a 4-cylinder 4.40 L diesel engine.

Engine — 805/805-4 engine specifications
Make & modelVALMET TD 44 DS 8
Cylinders4, liquid-cooled
Displacement268.3 ci · 4.40 L
Max torque270 lb·ft · 366 N·m @ 1,400 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Valmet 805”

How much will an 805/805-4 lift, and what is its hydraulic flow?

An 805/805-4 lifts 9,149 lb (4,150 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 805/805-4 hydraulics and PTO specifications
Pump flow13.5 gpm · 51.2 L/min
Pressure2,901 psi · 200 bar
Hitch categoryCategory 2
Lift at ends9,149 lb · 4,150 kg
Rear PTOIndependent, engine-driven, 540 rpm @ 1,893 engine rpmEngages under load

Source · Traktorenlexikon, “Valmet 805”

What transmission does an 805/805-4 have?

Transmission specifications for the 805/805-4 are below.

Transmission — 805/805-4 transmission specifications
ClutchPedal-operated dry LuK single-plate clutch
BrakesPedal-operated hydraulic wet Girling disc brakes acting on differential shafts
SteeringHydrostatic Danfoss steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Valmet 805”

How much does an 805/805-4 weigh?

An 805/805-4 weighs 7,804 lb (3,540 kg) unladen.

Weights & dimensions — 805/805-4 weights and dimensions
Unladen weight7,804 lb · 3,540 kgtwo-wheel-drive version
Wheelbase93.9 in · 2,385 mmtwo-wheel-drive version
Length177.8 in · 4,515 mm
Width83.9 in · 2,130 mm
Height106.5 in · 2,705 mm
Ground clearance18.7 in · 475 mmtwo-wheel-drive version
Front track57.7–69.5 in · 1,465–1,765 mmtwo-wheel-drive version
Rear track59.8–83.1 in · 1,520–2,110 mm

Source · Traktorenlexikon, “Valmet 805”

What oil does an 805/805-4 take, and how much?

An 805/805-4 engine takes 12.7 qt (12.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

805/805-4 fluid capacities, grades and service intervals
SystemCapacity
Engine oil12.7 qt · 12.0 LSource: Traktorenlexikon, “Valmet 805” · single source, not independently verified
Transmission & hydraulic53.9 qt · 51.0 LSource: Traktorenlexikon, “Valmet 805” · single source, not independently verified
Front axle4.2 qt · 4.0 LSource: Traktorenlexikon, “Valmet 805” · single source, not independently verified
Cooling system16.4 qt · 15.5 LSource: Traktorenlexikon, “Valmet 805” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an 805/805-4?

Within 10% of its 93.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the VALMET 805/805-4

Is an 805/805-4 two-wheel drive or four-wheel drive?

The VALMET 805/805-4 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does an 805/805-4 have?

An 805/805-4 has a independent 540 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Valmet 805”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet 805 — CC BY-SA 4.0, WIKIBOOKS-TL-116353 · revision 998087. Wikibooks contributors (Traktorenlexikon). Original document