• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1984–1989

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 905-4 Full specifications

VALMET D 66 DS 9 six-cylinder diesel. The manufacturer claimed 103.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

103.5 hp

77.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet 905”, claimed

Weight
9,105 lb
3-point lift
9,237 lb
Hyd. flow
12.5 gpm
Top speed
18.6 mph

VALMET 905-4 specs: key facts

  • The VALMET 905-4 was built from 1984 to 1989.

  • The VALMET 905-4 has a claimed engine power (gross or net not stated) of 77.2 kW (103.5 hp); it has no measured PTO figure.

  • The VALMET 905-4 is four-wheel drive (4WD).

  • The VALMET 905-4 has a VALMET D 66 DS 9 engine, a 6-cylinder 6.60 L diesel unit.

  • The VALMET 905-4 weighs 4,130 kg (9,105 lb) unladen.

  • The VALMET 905-4 has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the VALMET 905-4 lifts 4,190 kg (9,237 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 905-4 delivers 47.5 L/min (12.5 gpm).

Source · Traktorenlexikon, “Valmet 905”

How much horsepower does a 905-4 have?

The only figure for the 905-4 is 103.5 hp (77.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
103.5 hp

Source · Traktorenlexikon, “Valmet 905”

What engine is in a 905-4?

A 905-4 has a VALMET D 66 DS 9, a 6-cylinder 6.60 L diesel engine.

Engine — 905-4 engine specifications
Make & modelVALMET D 66 DS 9
Cylinders6, liquid-cooled
Displacement402.5 ci · 6.60 L
Max torque291 lb·ft · 395 N·m @ 1,100 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “Valmet 905”

How much will a 905-4 lift, and what is its hydraulic flow?

A 905-4 lifts 9,237 lb (4,190 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 905-4 hydraulics and PTO specifications
Pump flow12.5 gpm · 47.5 L/min
Pressure3,191 psi · 220 bar
Hitch categoryCategory 2
Lift at ends9,237 lb · 4,190 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,893 engine rpmEngages under load

Source · Traktorenlexikon, “Valmet 905”

What transmission does a 905-4 have?

Transmission specifications for the 905-4 are below.

Transmission — 905-4 transmission specifications
ClutchPedal-operated dry LuK single-plate clutch
BrakesPedal-operated hydraulic wet Girling disc brakes acting on the differential shafts
SteeringHydrostatic Danfoss steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Valmet 905”

How much does a 905-4 weigh?

A 905-4 weighs 9,105 lb (4,130 kg) unladen.

Weights & dimensions — 905-4 weights and dimensions
Unladen weight9,105 lb · 4,130 kg
Wheelbase100.8 in · 2,560 mm
Length200.8 in · 5,100 mm
Width84.3 in · 2,140 mm
Height106.5 in · 2,705 mm
Ground clearance18.7 in · 475 mm
Front track59.4–73.6 in · 1,510–1,870 mm
Rear track63.0–82.7 in · 1,600–2,100 mm
Turning radius, braked17.2 ft · 5.25 m

Source · Traktorenlexikon, “Valmet 905”

Which tractors compare with a 905-4?

Within 10% of its 96.3 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 905-4 two-wheel drive or four-wheel drive?

The VALMET 905-4 is four-wheel drive (4WD).

What PTO does a 905-4 have?

A 905-4 has a independent 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Valmet 905”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet 905CC BY-SA 4.0, WIKIBOOKS-TL-116354 · revision 997957. Wikibooks contributors (Traktorenlexikon). Original document