- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1991–2000
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 6600-4 (6600E) specs: hp, weight, years
VALMET 420 DS (420 DSE) four-cylinder diesel. The manufacturer claimed 103.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
103.5 hp
77.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 6600”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 9,700 lb
- 3-point lift
- 12,930 lb
- Hyd. flow
- 21.2 gpm
- Top speed
- 18.6–31.1 mph
VALMET 6600-4 (6600E) specs: key facts
The VALMET 6600-4 (6600E) was built from 1991 to 2000.
The VALMET 6600-4 (6600E) has a claimed engine power (gross or net not stated) of 77.2 kW (103.5 hp); it has no measured PTO figure.
The VALMET 6600-4 (6600E) is four-wheel drive (4WD).
The VALMET 6600-4 (6600E) has a VALMET 420 DS (420 DSE) engine, a 4-cylinder 4.40 L diesel unit.
The VALMET 6600-4 (6600E) weighs 4,400 kg (9,700 lb) unladen.
The VALMET 6600-4 (6600E) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the VALMET 6600-4 (6600E) lifts 5,865 kg (12,930 lb) at the lower-link ends.
The hydraulic pump of the VALMET 6600-4 (6600E) delivers 80.3 L/min (21.2 gpm).
Source · Traktorenlexikon, “Valmet 6600”
How much horsepower does a 6600-4 (6600E) have?
The only figure for the 6600-4 (6600E) is 103.5 hp (77.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 6600”
What engine is in a 6600-4 (6600E)?
A 6600-4 (6600E) has a VALMET 420 DS (420 DSE), a 4-cylinder 4.40 L diesel engine.
| Make & model | VALMET 420 DS (420 DSE) |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 268.3 ci · 4.40 L |
| Max torque | 299 lb·ft · 405 N·m @ 1,550 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Valmet 6600”
How much will a 6600-4 (6600E) lift, and what is its hydraulic flow?
A 6600-4 (6600E) lifts 12,930 lb (5,865 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 21.2 gpm · 80.3 L/min |
|---|---|
| Pressure | 2,031–2,248 psi · 140–155 bar |
| Hitch category | Category 2 |
| Lift at ends | 12,930 lb · 5,865 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,874 engine rpmEngages under load |
Source · Traktorenlexikon, “Valmet 6600”
What transmission does a 6600-4 (6600E) have?
Transmission specifications for the 6600-4 (6600E) are below.
| Clutch | Pedal operated dry Fichtel & Sachs single plate clutch |
|---|---|
| Brakes | Pedal-operated wet Valmet multi-disc brake acting on differential side shafts |
| Steering | Hydrostatic Danfoss steering |
| Top speed | 18.6–31.1 mph · 30–50 km/h |
Source · Traktorenlexikon, “Valmet 6600”
How much does a 6600-4 (6600E) weigh?
A 6600-4 (6600E) weighs 9,700 lb (4,400 kg) unladen.
| Unladen weight | 9,700 lb · 4,400 kg |
|---|---|
| Maximum permissible mass | 16,535 lb · 7,500 kg |
| Wheelbase | 91.6 in · 2,326 mm |
| Length | 177.7 in · 4,514 mm |
| Width | 78.1–101.8 in · 1,985–2,585 mm |
| Height | 108.3 in · 2,750 mm |
| Ground clearance | 19.1 in · 485 mm |
| Front track | 59.6–77.6 in · 1,515–1,970 mm |
| Rear track | 63.4–83.3 in · 1,610–2,115 mm |
| Turning radius, braked | 15.3 ft · 4.65 m |
Source · Traktorenlexikon, “Valmet 6600”
What oil does a 6600-4 (6600E) take, and how much?
A 6600-4 (6600E) engine takes 13.7 qt (13.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 13.7 qt · 13.0 LSource: Traktorenlexikon, “Valmet 6600” · single source, not independently verified |
| Transmission & hydraulic | 45.4 qt · 43.0 LSource: Traktorenlexikon, “Valmet 6600” · single source, not independently verified |
| Final drives | 1.6 qt · 1.5 LSource: Traktorenlexikon, “Valmet 6600” · single source, not independently verified |
| Cooling system | 16.4 qt · 15.5 LSource: Traktorenlexikon, “Valmet 6600” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 6600-4 (6600E)?
Within 10% of its 103.5 hp of claimed engine power, the same type, and first built within 15 years of it.
- UTB U-1033 (DT)103.5 hp engine, claimed · 1994–2004Side by side with the 6600-4 (6600E) →
- Hürlimann 910.6 XT103.5 hp engine, claimed · 1995–2004Side by side with the 6600-4 (6600E) →
- Lamborghini 1060 DT103.5 hp engine, claimed · 1995–2004Side by side with the 6600-4 (6600E) →
- VALMET 905-4103.5 hp engine, claimed · 1984–1989Side by side with the 6600-4 (6600E) →
- New Holland TM 115103.5 hp engine, claimed · 1999–2002Side by side with the 6600-4 (6600E) →
- ZETOR 10641103.5 hp engine, claimed · 1999–2002Side by side with the 6600-4 (6600E) →
Common questions about the VALMET 6600-4 (6600E)
Is a 6600-4 (6600E) two-wheel drive or four-wheel drive?
The VALMET 6600-4 (6600E) is four-wheel drive (4WD).
What PTO does a 6600-4 (6600E) have?
A 6600-4 (6600E) has a independent 540/1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Valmet 6600”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 6600 — CC BY-SA 4.0, WIKIBOOKS-TL-116469 · revision 999188. Wikibooks contributors (Traktorenlexikon). Original document