- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1984–1989
WhichTractor size, not the maker’s category
VALMET 905-4 Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the 905-4.
Engine power, claimed · gross or net not stated
103.5 hp
77.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 905”, claimed
How much will a 905-4 lift?
A 905-4 lifts 9,237 lb (4,190 kg) at the lower-link ends.
| Pump flow | 12.5 gpm · 47.5 L/min |
|---|---|
| Steering pump flow | 4.4 gpm · 16.8 L/min |
| Hydraulic pressure | 3,191 psi · 220 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 9,237 lb · 4,190 kg |
| Lift capacity 610 mm behind ends | 6,947 lb · 3,151 kg |
Source · Traktorenlexikon, “Valmet 905”
What PTO does a 905-4 have?
A 905-4 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,893 rpm |
| PTO power, claimed | 96.3 hp · 71.8 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Valmet 905”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Valmet 905”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 905 — CC BY-SA 4.0, WIKIBOOKS-TL-116354 · revision 997957. Wikibooks contributors (Traktorenlexikon). Original document