- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1980–1983
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 802/802-4 Full specifications
VALMET 411 CS four-cylinder diesel. The manufacturer claimed 80.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
80.9 hp
60.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 802”, claimed
- Weight
- 7,802 lb
- 3-point lift
- 6,393 lb
- Hyd. flow
- 11.4 gpm
- Top speed
- 18.6 mph
VALMET 802/802-4 specs: key facts
The VALMET 802/802-4 was built from 1980 to 1983.
The VALMET 802/802-4 has a claimed engine power (gross or net not stated) of 60.3 kW (80.9 hp); it has no measured PTO figure.
The VALMET 802/802-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The VALMET 802/802-4 has a VALMET 411 CS engine, a 4-cylinder 4.40 L diesel unit.
The VALMET 802/802-4 weighs 3,539 kg (7,802 lb) unladen.
The VALMET 802/802-4 has an independent rear PTO running at 540 rpm.
The three-point hitch of the VALMET 802/802-4 lifts 2,900 kg (6,393 lb) at the lower-link ends.
The hydraulic pump of the VALMET 802/802-4 delivers 43.0 L/min (11.4 gpm).
Source · Traktorenlexikon, “Valmet 802”
How much horsepower does an 802/802-4 have?
The only figure for the 802/802-4 is 80.9 hp (60.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 802”
What engine is in an 802/802-4?
An 802/802-4 has a VALMET 411 CS, a 4-cylinder 4.40 L diesel engine.
| Make & model | VALMET 411 CS |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 268.3 ci · 4.40 L |
| Max torque | 226 lb·ft · 306 N·m @ 1,450 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Valmet 802”
How much will an 802/802-4 lift, and what is its hydraulic flow?
An 802/802-4 lifts 6,393 lb (2,900 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 11.4 gpm · 43.0 L/min |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 6,393 lb · 2,900 kg |
| Rear PTO | Independent, engine-driven, 540 rpm @ 1,556 engine rpmEngages under loadGround-speed PTO available |
| PTO shaft | 1 3/8"- 6 splines (Form-A) |
Source · Traktorenlexikon, “Valmet 802”
What transmission does an 802/802-4 have?
Transmission specifications for the 802/802-4 are below.
| Clutch | Dry Fichtel & Sachs double clutch |
|---|---|
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Valmet 802”
How much does an 802/802-4 weigh?
An 802/802-4 weighs 7,802 lb (3,539 kg) unladen.
| Unladen weight | 7,802 lb · 3,539 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 92.1 in · 2,339 mmtwo-wheel-drive version |
| Length | 151.2 in · 3,840 mmtwo-wheel-drive version |
| Width | 77.6 in · 1,971 mmtwo-wheel-drive version |
| Height | 98.4 in · 2,499 mmtwo-wheel-drive version |
| Ground clearance | 18.9 in · 480 mmtwo-wheel-drive version |
| Front track | 61.2–69.1 in · 1,554–1,754 mmtwo-wheel-drive version |
| Rear track | 56.5–77.3 in · 1,436–1,964 mmtwo-wheel-drive version |
| Turning radius, braked | 11.8 ft · 3.61 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Valmet 802”
Which tractors compare with an 802/802-4?
Within 10% of its 68.3 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Ford 671068.3 hp PTO, claimed · 1981–1989Side by side with the 802/802-4 →
- Renault 80-12 SP68.3 hp PTO, claimed · 1986–1989Side by side with the 802/802-4 →
- Renault 80-14 SP68.3 hp PTO, claimed · 1986–1989Side by side with the 802/802-4 →
- Renault 80-32 PX68.3 hp PTO, claimed · 1989–1993Side by side with the 802/802-4 →
- Renault 80-34 PX68.3 hp PTO, claimed · 1989–1993Side by side with the 802/802-4 →
- Renault 95-12 TX68.1 hp PTO, claimed · 1982–1986Side by side with the 802/802-4 →
Everything else people ask
Is an 802/802-4 two-wheel drive or four-wheel drive?
The VALMET 802/802-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an 802/802-4 have?
An 802/802-4 has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines (Form-A) shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Valmet 802”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 802 — CC BY-SA 4.0, WIKIBOOKS-TL-116345 · revision 997650. Wikibooks contributors (Traktorenlexikon). Original document