Ford 6710 vs VALMET 802/802-4
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 6710 and the 802/802-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 6710 | 802/802-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80.9 hp | 80.9 hp | — |
| Engine declared | — | VALMET 411 CS | — |
| Displacement declared | — | 4.40 L | — |
| Maximum torque declared | 220 lb·ft · 298 N·m | 226 lb·ft · 306 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal-operated dry Borg & Beck single-plate clutch | Dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 18.2 gpm · 68.9 L/min | 11.4 gpm · 43.0 L/min | +60% 6710 |
| Three-point lift at ends declared | 9,381 lb · 4,255 kg | 6,393 lb · 2,900 kg | +47% 6710 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,975 lb · 3,164 kg | 7,802 lb · 3,539 kg | +12% 802/802-4 |
| Wheelbase declared | 101.6 in · 2,580 mm | 92.1 in · 2,339 mm | +10% 6710 |
| Length declared | 152.5 in · 3,874 mm | 151.2 in · 3,840 mm | — |
| Width declared | 76.9 in · 1,953 mm | 77.6 in · 1,971 mm | — |
| Height declared | 114.6 in · 2,911 mm | 98.4 in · 2,499 mm | +16% 6710 |
| Ground clearance declared | 20.5 in · 520 mm | 18.9 in · 480 mm | +8% 6710 |
| Turning radius, braked declared | — | 11.8 ft · 3.61 m | — |
| Fuel tank declared | 188.1 qt · 178.0 L | 95.1 qt · 90.0 L | +98% 6710 |
Ford 6710 sources
Source
- Source: Traktorenlexikon, “Ford 6710”
VALMET 802/802-4 sources
Source
- Source: Traktorenlexikon, “Valmet 802”