8 material differences · fewer than 12
Tractor oneVALMET 802/802-41980–1983No measured PTO figureTractor twoWHITE 801989–1991No measured PTO figure
Which should you choose?
Read our verdict on the 802/802-4 and the 80 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 802/802-4 | 80 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80.9 hp | 80.9 hp | — |
| Engine declared | VALMET 411 CS | CUMMINS BT-4 390 | differs |
| Displacement declared | 4.40 L | 3.93 L | +12% 802/802-4 |
| Maximum torque declared | 226 lb·ft · 306 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry Fichtel & Sachs double clutch | Pedal-operated dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 11.4 gpm · 43.0 L/min | — | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,802 lb · 3,539 kg | 7,150 lb · 3,243 kg | +9% 802/802-4 |
| Wheelbase declared | 92.1 in · 2,339 mm | 95.5 in · 2,426 mm | — |
| Length declared | 151.2 in · 3,840 mm | 152.5 in · 3,874 mm | — |
| Width declared | 77.6 in · 1,971 mm | 81.5 in · 2,070 mm | — |
| Ground clearance declared | 18.9 in · 480 mm | 18.9 in · 481 mm | — |
| Turning radius, braked declared | 11.8 ft · 3.61 m | 11.0 ft · 3.35 m | +8% 802/802-4 |
| Fuel tank declared | 95.1 qt · 90.0 L | 80.0 qt · 75.7 L | +19% 802/802-4 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
VALMET 802/802-4 sources
- Source: Traktorenlexikon, “Valmet 802”
WHITE 80 sources
- Source: Traktorenlexikon, “White 80”