- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1980–1983
WhichTractor size, not the maker’s category
VALMET 802/802-4 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the 802/802-4.
Engine power, claimed · gross or net not stated
80.9 hp
60.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 802”, claimed
How much will an 802/802-4 lift?
An 802/802-4 lifts 6,393 lb (2,900 kg) at the lower-link ends.
| Pump flow | 11.4 gpm · 43.0 L/min |
|---|---|
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 6,393 lb · 2,900 kg |
| Hitch control | Lifting, lowering, lowering throttle, position, draft and mixed control |
Source · Traktorenlexikon, “Valmet 802”
What PTO does an 802/802-4 have?
An 802/802-4 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,556 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-A) |
| PTO power, claimed | 68.3 hp · 50.9 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Valmet 802”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Valmet 802”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 802 — CC BY-SA 4.0, WIKIBOOKS-TL-116345 · revision 997650. Wikibooks contributors (Traktorenlexikon). Original document