WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1991–2007

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 6300-4 Full specifications

VALMET 420 DS/420 DSRE/44 DT four-cylinder diesel. The manufacturer claimed 83.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

83.8 hp

62.5 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet 6300”, claimed

Weight
8,973 lb
3-point lift
9,601 lb
Hyd. flow
18.4 gpm
Top speed
18.6–24.9 mph

VALMET 6300-4 specs: key facts

  • The VALMET 6300-4 was built from 1991 to 2007.

  • The VALMET 6300-4 has a claimed engine power (gross or net not stated) of 62.5 kW (83.8 hp); it has no measured PTO figure.

  • The VALMET 6300-4 is four-wheel drive (4WD).

  • The VALMET 6300-4 has a VALMET 420 DS/420 DSRE/44 DT engine, a 4-cylinder 4.40 L diesel unit.

  • The VALMET 6300-4 weighs 4,070 kg (8,973 lb) unladen.

  • The VALMET 6300-4 has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the VALMET 6300-4 lifts 4,355 kg (9,601 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 6300-4 delivers 69.5 L/min (18.4 gpm).

Source · Traktorenlexikon, “Valmet 6300”

How much horsepower does a 6300-4 have?

The only figure for the 6300-4 is 83.8 hp (62.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
83.8 hp

Source · Traktorenlexikon, “Valmet 6300”

What engine is in a 6300-4?

A 6300-4 has a VALMET 420 DS/420 DSRE/44 DT, a 4-cylinder 4.40 L diesel engine.

Engine — 6300-4 engine specifications
Make & modelVALMET 420 DS/420 DSRE/44 DT
Cylinders4, liquid-cooled
Displacement268.3 ci · 4.40 L
Electrical system12 V

Source · Traktorenlexikon, “Valmet 6300”

How much will a 6300-4 lift, and what is its hydraulic flow?

A 6300-4 lifts 9,601 lb (4,355 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 6300-4 hydraulics and PTO specifications
Pump flow18.4 gpm · 69.5 L/min
Hitch categoryCategory 2
Lift at ends9,601 lb · 4,355 kg
Rear PTO540/1000 rpm @ 1,874 engine rpm

Source · Traktorenlexikon, “Valmet 6300”

What transmission does a 6300-4 have?

Transmission specifications for the 6300-4 are below.

Transmission — 6300-4 transmission specifications
SteeringHydrostatic DANFOSS steering
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Valmet 6300”

How much does a 6300-4 weigh?

A 6300-4 weighs 8,973 lb (4,070 kg) unladen.

Weights & dimensions — 6300-4 weights and dimensions
Unladen weight8,973 lb · 4,070 kg
Maximum permissible mass14,330 lb · 6,500 kg
Wheelbase91.7 in · 2,330 mm
Length174.2 in · 4,425 mm
Width79.1 in · 2,010 mm
Height106.9 in · 2,715 mm
Ground clearance17.1 in · 435 mm
Front track59.8–77.8 in · 1,520–1,975 mm
Rear track59.3–82.9 in · 1,505–2,105 mm
Turning radius, braked15.3 ft · 4.65 m

Source · Traktorenlexikon, “Valmet 6300”

Which tractors compare with a 6300-4?

Within 10% of its 76.8 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 6300-4 two-wheel drive or four-wheel drive?

The VALMET 6300-4 is four-wheel drive (4WD).

What PTO does a 6300-4 have?

A 6300-4 has a 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Valmet 6300”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet 6300 — CC BY-SA 4.0, WIKIBOOKS-TL-116460 · revision 999127. Wikibooks contributors (Traktorenlexikon). Original document